Items where Author is "A. Raof, Natasha"

Rosli, Muhammad Izzat Amin and A. Raof, Natasha and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Investigation of chip formation during turning of aluminum alloys 7075-T651 in dry and chilled air condition. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kulliyyah of Engineering, IIUM.

Haszerin, Muhammad Na'iim and A. Raof, Natasha and M Zamre, M K A and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Machining performance of carbide insert in turning aluminum alloy 7075-T651. In: International Conference on Manufacturing Engineering Technology (ICONMET 2021), 14-15 July 2021, Asenia Resort, Langkawi, Malaysia.

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2022) Comparison of tool wear mechanisms during drilling of aluminium alloy 7075 in dry and chilled air conditions. Journal of Science and Technology, 14 (1). pp. 67-74. ISSN 2229-8460 E-ISSN 2600-7924

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. In: Third International Conference on Recent Advances in Materials and Manufacturing 2021, 25-26 November 2021, India.

Dahnel, Aishah Najiah and Fauzi, Muhammad Haziq and A. Raof, Natasha and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2022) Tool wear and burr formation during drilling of aluminum alloy 7075 in dry and with cutting fluid. Materials Today: Proceedings, 59 (2022). pp. 808-813. ISSN 22147853

Ramli, Siti Fatirah and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily and Dahnel, Aishah Najiah and A. Raof, Natasha (2022) Optimization of machining parameters during milling of carbon fibre reinforced plastics. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 - 30 September 2020, Langkawi, Malaysia.

Ramli, Siti Fatirah and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily and Dahnel, Aishah Najiah and A. Raof, Natasha (2022) Optimization of machining parameters values during milling on carbon fiber reinforced plastic (CFRP) using RSM. Malaysian Tribology Society, 34. pp. 24-38. E-ISSN 2289-7232

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2021) The effect of chilled air on burr formation when drilling aluminium alloy in manufacturing industry. International Journal of Progressive Sciences and Technologies (IJPSAT), 28 (1). pp. 437-445. ISSN 2509-0119

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Tribology of Composite Materials and Coatings in Manufacturing. In: Tribological Applications of Composite Materials. Springer, Singapore, pp. 283-308.

Mokhtar, Suhaily and Yusof, Nur Syahira Sofyani and Mohd Asri, Mohd Ashraff and Che Haron, Che Hassan and A. Raof, Natasha and Muhammad Khairusalleh, Nor Khairusshima and Dahnel, Aishah Najiah (2020) Effects of drilled area temperatures on drilling of NFRP composites: a review. TEST Engineering & Management, 83 (May – June 2020). 1314 -1321. ISSN 0193-4120

Mokhtar, Suhaily and A. Raof, Natasha and Muhammad Khairusalleh, Nor Khairusshima and Dahnel, Aishah Najiah (2020) A review on the application of various MQL base in metal cutting operation of aluminum alloys. Test Engineering and Management, May-June 2020. pp. 1168-1174. ISSN 0193-4120

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2020) The effect of cutting parameters on tool wear in drilling aluminium 7075. TEST Engineering & Management, 83 (May-June). pp. 1274-1280. ISSN 0193-4120

Daud @ Ab Aziz, Nur Sofwati and A. Raof, Natasha and Ghani, Abdul Rahman and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2020) Cutting tool performance in turning of AL 7075-t651 aluminium alloy. IIUM Engineering Journal, 21 (2). pp. 177-185. ISSN 1511-788X E-ISSN 2289-7860

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Environmental-friendly tribological and lubrication in manufacturing processes. In: 4th International Conference on Sustainable Materials (e-ICoSM) 2020), 3rd September 2020, Pahang. (Unpublished)

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology, 8 (5). pp. 4347-4353. ISSN 2238-7854

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2018) The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 -9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi and Abdul Hadi, Musfirah (2016) Temperature at the tool-chip interface in cryogenic and dry turning of AISI 4340 using carbide tool. International Journal of Simulation Modelling, 15 (2). pp. 201-212. ISSN 1726-4529

A. Ghani, Jaharah and A. Raof, Natasha and Che Haron, Che Hassan and Junaidi, Syarif (2016) TRIZ approach for machining process innovation in cryogenic environment. International Journal of Materials and Product Technology, 53 (3-4). pp. 286-297. ISSN 0268-1900 E-ISSN 1741-5209

A. Raof, Natasha and Othman, Hazreen and A. Ghani, Jaharah and Che Haron, Che Hassan and Junaidi, Syarif (2014) Chip formation and coefficient of friction in turning S45C medium carbon steel. International Journal of Mechanical & Mechatronics Engineering, 14 (6). pp. 89-92. ISSN 2227-2763 E-ISSN 2077-1258

A. Raof, Natasha and A. Ghani, Jaharah and Syarif, Junaidi and Che Haron, Che Hassan and Abdul Hadi, Musfirah (2014) Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering, 18th-22nd March 2014, Kuala Lumpur.

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2012) The effect of cryogenic application on surface integrity in manufacturing process: A review. Journal of Applied Sciences Research, 8 (10). pp. 4880-4890. ISSN 1819-544X