Items where Author is "A. Ghani, Jaharah"

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology, 8 (5). pp. 4347-4353. ISSN 2238-7854

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi and Mohd Ali, Afifah and Muhamad Khairussaleh, Nor Khairusshima (2018) Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills. In: 2018 6th International Conference on Nano and Materials Science (ICNMS 2018), 15th-17th January 2018, Lakeland; United States.

Azmi, H. and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily (2018) Comparison effect of delamination factor (Fd) on unidirectional and woven kenaf fibre reinforced plastic composite materials during milling process [Pembandingan kesan faktor pelekangan (Fd) ke atas bahan komposit plastik bertetulang ekaarah dan bertenun semasa proses pemesinan kisar]. Sains Malaysiana, 47 (4). pp. 829-838. ISSN 0126-6039

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Mohd Ali, Afifah and Mohd Khairussaleh, Nor Khairusshima (2018) Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2018) The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 -9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Harun, Azmi and Che Haron, Che Hassan and A. Ghani, Jaharah and Mokhtar, Suhaily and Abdul Rahim, Yuzairi (2018) Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments. In: 3rd International Conference on Science, Technology and Interdisciplinary Research (IC-STAR 2017), 18th-20th Sept. 2017, Bandar Lampung, Indonesia.

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi (2017) Evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates. Journal of Mechanical Engineering, SI 3 (1). pp. 149-169. ISSN 1823-5514 E-ISSN 5520-164X

Tomadi, Siti Haryani and A. Ghani, Jaharah and Che Haron, Che Hassan and Hassan, Mas Ayu and Daud, Rosdi (2017) Effect of cutting parameters on surface roughness in end milling of AlSi/AlN metal matrix composite. Procedia Engineering, 184. pp. 58-69. ISSN 18777058

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi and Abdul Hadi, Musfirah (2016) Temperature at the tool-chip interface in cryogenic and dry turning of AISI 4340 using carbide tool. International Journal of Simulation Modelling, 15 (2). pp. 201-212. ISSN 1726-4529

Muhamad Khairussaleh, Nor Khairusshima and Che Haron, Che Hassan and A. Ghani, Jaharah (2016) Study on wear mechanism of solid carbide cutting tool in milling CFRP. Journal of Materials Research, 31 (13). pp. 1893-1899. ISSN 0884-2914

A. Ghani, Jaharah and A. Raof, Natasha and Che Haron, Che Hassan and Junaidi, Syarif (2016) TRIZ approach for machining process innovation in cryogenic environment. International Journal of Materials and Product Technology, 53 (3-4). pp. 286-297. ISSN 0268-1900 E-ISSN 1741-5209

A. Raof, Natasha and Othman, Hazreen and A. Ghani, Jaharah and Che Haron, Che Hassan and Junaidi, Syarif (2014) Chip formation and coefficient of friction in turning S45C medium carbon steel. International Journal of Mechanical & Mechatronics Engineering, 14 (6). pp. 89-92. ISSN 2227-2763 E-ISSN 2077-1258

A. Raof, Natasha and A. Ghani, Jaharah and Syarif, Junaidi and Che Haron, Che Hassan and Abdul Hadi, Musfirah (2014) Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering, 18th-22nd March 2014, Kuala Lumpur.

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan and Syarif, Junaidi (2012) The effect of cryogenic application on surface integrity in manufacturing process: A review. Journal of Applied Sciences Research, 8 (10). pp. 4880-4890. ISSN 1819-544X

Muhamad Khairussaleh, Nor Khairusshima and Che Haron, Che Hassan and A. Ghani, Jaharah and Amin, A. K. M. Nurul (2012) Tool wear and surface roughness on milling carbon fibre reinforced plastic using chilled air. In: The International Conference on Engineering and Built Environment (ICEBE) 2012, 6th-7th Nov. 2012, Residence Hotel, UNITEN, Bangi, Selangor. (Unpublished)