IIUM Repository

professor mirghani ishag ahmed

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Ahmed, Hamdi E. and Ahmed, Mirghani Ishag and Yusoff, M. Z. (2016) Numerical and experimental comparative study on nanofluids flow and heat transfer in a ribbed triangular duct. Experimental Heat Transfer, 29 (6). pp. 759-780. ISSN 0891-6152 E-ISSN 1521-0480
  2. Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and M.Z, Yusoff and Hawlader, Mohammad Nurul Alam and Habeeb, Al-Ani (2015) Experimental study of heat transfer augmentation in non-circular duct using combined nanofluids and vortex generator. International Journal of Heat and Mass Transfer, 90. pp. 1197-1206. ISSN 0017-9310
  3. Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and Yusoff, Mohd Zamri (2015) Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators. Applied Thermal Engineering, 91. pp. 191-201. ISSN 1359-4311
  4. Manaf, Hazli and Ahmed, Shugata and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) A triangular double layer microchannel heat sink: effect of parallel and counter flow. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)
  5. Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. In: International conference on Materials,Mechatronics, Manufacturing & Mechanical Engineering 2014, 24th-25th September 2014, Kuching , Sarawak, Malaysia . (Unpublished)
  6. Ahmed, Mirghani Ishag and Seder, Islam M.F. and Ahmed, Shugata (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. In: International Conference on Materials, Mechatronics, Manufacturing & Mechanical Engineering, 24-25 Oct 2014, Kuching , Sarawak, Malaysia . (Unpublished)
  7. Ahmed, Mirghani Ishag and Ahmed, Hamdi E. and Yusoff, M.Z. and Hawlader, M.N.A. (2014) Numerical analysis of heat transfer and nanofluid flow in a triangular duct with vortex generator: two-phase model. Heat Transfer—Asian Research, 45 (3). pp. 1-21. ISSN 1099-2871
  8. Seder, Islam M.F. and Ahmed, Mirghani Ishag and Ahmed, Shugata and Hawlader, M.N.A. (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 211-217. ISSN 1991-8178
  9. Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. Australian Journal of Basic and Applied Sciences, 8 (15 ). pp. 18-24. ISSN 1991-8178
  10. Ahmed, Mirghani Ishak and Ismail, Ahmad Faris and Abakr, Yousif Abdalla and Amin, A. K. M. Nurul (2007) Effectiveness of cryogenic machining with modified tool holder. Journal of Materials Processing Technology, 185 (1-3). pp. 91-96. ISSN 0924-0136
  11. Mirghani, Mohamed Elwathig Saeed (2012) Processing of date palm kernel (DPK) for production of nutritious drink. Advances in Natural and Applied Sciences, 6 (5). pp. 575-582. ISSN 1995-0772
  12. Ahmed, Mirghani Ishak and Abakrb, Yousif A. and Ismail, Ahmad Faris (2011) Developments on solar operated water desalination. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 163-168. ISBN 9789674181582
  13. Ahmed, Mirghani Ishak and Hrairi, Meftah (2011) Thermal analysis of a micro device used for detection of colorectal cancer. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 220-228. ISBN 9789674181581
  14. Al-Zuhair, Sulaiman and Abakrb, Yousif A. and Ahmed, Mirghani Ishak (2011) The effect of the operating conditions on the apparent viscosity of crude palm oil during separation. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 213-219. ISBN 9789674181581
  15. Abakrb, Yousif A. and Ismail, Ahmad Faris and Ahmed, Mirghani Ishak (2011) Experimental investigation of a multistage evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 197-202. ISBN 9789674181581
  16. El-Awad, M.M. and Ahmed, Mirghani Ishak (2011) Theoretical and experimental evaluation of LPG as refrigerant for domestic refrigerators and freezers. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 169-178. ISBN 9789674181581
  17. Ismail, Ahmad Faris and Ahmed, Mirghani Ishak and Abakrb, Yousif A. (2011) CFD analysis of an evacuated solar still. In: Alternative energy. IIUM Press, Kuala Lumpur, pp. 156-162. ISBN 9789674181581
  18. Ahmed, Mirghani Ishak and Sadiq, M.J (2011) An autonomous integrated architecture for the next generation air traffic management and Avionics systems. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 444-449. ISBN 9789670225685
  19. Pervez, T. and Ahmed, Mirghani Ishak (2011) Anisotropic laminated composite theory for delamination analysis of curved bar. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 90-100. ISBN 9789670225685
  20. Ahmed, Mirghani I. and Abakar, Y.A and Pervez, T. and Ismail, Ahmad Faris (2011) Design and analysis of a solar still using finite element method. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 79-89. ISBN 9789670225685

Most Viewed Items

Item titleViews
1CFD analysis of an evacuated solar still1555
2Theoretical and experimental evaluation of LPG as refrigerant for domestic refrigerators and freezers1441
3Thermal analysis of a micro device used for detection of colorectal cancer1400
4Design and analysis of a solar still using finite element method1383
5Developments on solar operated water desalination1352
6Experimental investigation of a multistage evacuated solar still1311
7The effect of the operating conditions on the apparent viscosity of crude palm oil during separation1208
8Processing of date palm kernel (DPK) for production of nutritious drink1194
9An autonomous integrated architecture for the next generation air traffic management and Avionics systems1016
10Anisotropic laminated composite theory for delamination analysis of curved bar993
11Effectiveness of cryogenic machining with modified tool holder983
12Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines970
13Numerical analysis of heat transfer and nanofluid flow in a triangular duct with vortex generator: two-phase model940
14Experimental study of heat transfer augmentation in non-circular duct using combined nanofluids and vortex generator829
15Numerical investigation of flow boiling in double-layer microchannel heat sink826
16Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators 817
17Numerical investigation of flow boiling in double-layer microchannel heat sink789
18Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines780
19A triangular double layer microchannel heat sink: effect of parallel and counter flow758
20Numerical and experimental comparative study on nanofluids flow and heat transfer in a ribbed triangular duct573