Dr WAN AHMAD YUSMAWIZA WAN YUSOFF

Latest Additions

1. Wan Yusoff, Wan Ahmad Yusmawiza (2018) Product development and cost analysis of fabricating the prototype of roller clamp in intravenous (I.V) tubing medical devices using fused deposition modeling (FDM) technology. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
2. Wan Yusoff, Wan Ahmad Yusmawiza and Azrai, Muhammad and Mohamad, Ahlam Hadi (2014) Improving the design of peripheral IV therapy by employing product development approach and rapid prototyping technology. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10 -11 April 2014, Seoul; South Korea.
3. Wan Yusoff, Wan Ahmad Yusmawiza (2017) The application of scanning electron microscope and melt flow index for orange peel in laser sintering process. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 615-622. ISSN 2502-4752
4. Wan Yusoff, Wan Ahmad Yusmawiza and Ani, Mohd Hanafi and Pham, DT and Dotchev, K. (2015) Influence of molecular weight average, degree of crystallinity, and viscosity of different polyamide PA12 powder grades on the microstructures of laser sintered part. In: 2015 3rd Asia Conference on Mechanical and Materials Engineering (ACMME 2015), 23rd-24th July 2015, Chengdu, Sichuan, China.
5. Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2014) Investigation of the thermal properties of different grades Polyamide 12 (PA12) in improving laser sintering process (SLS). Advanced Materials Research, 548/49. pp. 294-296. ISSN 1022-6680
6. WAY Yusoff, wan and Hadi Puwanto, purwanto and Farizahani, mohd and P.T Pham, Duc (2014) Investigation into the differences Chemical properties of Laser Sintering polymer powders using Fourier Transform Infrared Spectroscopy. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10-11 April 2014, Seoul.
7. Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2012) Fabrication of surgical cranioplasty biomodel using fused deposition modeling. In: 2012 International Conference on Innovation Management and Technology Research (ICIMTR), 21 - 22 May 2012, Malacca, Malaysia.
8. Mohd, Alias and Hindle, C. and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Mould filling and pressure distribution for polymer resins. Advanced Materials Research, 264/65. pp. 771-776. ISSN 1022-6680
9. Wan Yusoff, Wan Ahmad Yusmawiza and Fakhrani, Muhammad and Fairus, Mohd and Adesta, Erry Yulian Triblas (2011) The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)
10. Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2011) Application of rapid prototyping in medical engineering. In: Asia Pacific Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2011), 5-6 December 2011, Kangar, Perlis, Malaysia. (Unpublished)
11. Syed Abdul Bahari, Syed Najib and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Quality improvement of Three-way Catalytic Converter (TWC) system: application of failure modes and effects analysis (FMEA) methodology. LAP Lambert Academic Publishing, Germany. ISBN 9783845443287
12. Pham, Duc Trung and Shwe, S. and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and -, Farizahani (2011) Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science, 2011, united kingdom. (Unpublished)
13. Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2011) Improvement of powder management and recycling in laser sintering. In: International Conference on Manufacturing and Industrial Engineering, (ICMIE), 24-26 June 2011, Paris, France.
14. Wan Yusoff, Wan Ahmad Yusmawiza and Syazmi, Khairil and Mohd Naeem, Saripan (2009) Investigation on mechanical properties of ABS using rapid rpototyping technology and injection molding process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
15. Wan Yusoff, Wan Ahmad Yusmawiza and Sa’edun, Mohamad and Afiq, Faidhi (2009) The application of rapid prototyping technology and FMEA quality tool in the development of automotive component. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
16. Wan Yusoff, Wan Mohd Yusmawiza and Md Zain, Mohd Izzuan and Kamasan, Muhammad Asrul and Nor Aman, Zuraida (2009) Rapid prototyping in Malaysia. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
17. Wan Yusoff, Wan Ahmad Yusmawiza and Badri, Zu Hazmin and Masri, Zainal and Hussin, Zahir (2009) Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD). In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
18. Wan Yusoff, Wan Ahmad Yusmawiza and Pham, D. T. and Dotchev, K. (2009) Effect of employing different grades of recycled polyamide 12 on the surface texture of laser sintered (LS) parts. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
19. Wan Yusoff, Wan Ahmad Yusmawiza and A. Nasir, Safwa and Ahmad, Wan Mohamad Hakimi (2011) Investigation of the effect of “Orange Peel” surface texture on the laser sintered part. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25th - 28th September 2011, Langkawi, Malaysia.
20. A. W. , Fatimatuzahraa and Baharuddin, Farahaina and Wan Yusoff, Wan Ahmad Yusmawiza (2011) The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 25-28 September 2011, Langkawi, Malaysia. (Unpublished)

Most Viewed Items