IIUM Repository

Dr Erwin Sulaeman

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Legowo, Ari and Sulaeman, Erwin and Rosli, Muhammad Danial (2019) Developing magnetic damper system for microsatellite. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 93-99. ISSN 2277-3878 E-ISSN 2249-8958
  2. Ibren, Mohamed and Sulaeman, Erwin and Legowo, Ari and Abdullah, Nur Azam (2019) Roll control reversal of variable swept wing in supersonic flow. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 288-291. ISSN 2249-8958 E-ISSN 2277-3878
  3. Islam, Maidul and Okasha, Mohamed Elsayed Aly Abd Elaziz and Sulaeman, Erwin and Fatai, Sado and Legowo, Ari (2019) Performance evaluation of linear quadratic regulator and linear quadratic Gaussian controllers on quadrotor platform. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 191-195. ISSN 2277-3878 E-ISSN 2249-8958
  4. Mohammed, Mohammed Idris and Sulaeman, Erwin and Musthapa, Faizal (2019) Adopting dynamic transient response analysis for sensors positioning to monitor cable stayed bridge. International Journal of Recent Technology and Engineering, 7 (6S). pp. 54-60. ISSN 2277-3878 E-ISSN 2249-8958
  5. Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Badran, Marwan A A (2018) Trilinear finite element solution of three dimensional heat conduction partial differential equations. International Journal of Engineering & Technology (UAE), 7 (4.36). pp. 379-384. ISSN 2227-524X
  6. Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Hilmy, Irfan and Badran, Marwan A A (2019) Convergence and error analysis of a bi-quadratic triangular galerkin finite element model for heat conduction simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 78-86. ISSN 2289-7879
  7. Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2019) Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 1-8. ISSN 2289-7879
  8. Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Muhammad, Hasibul Hasan (2018) Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology, 7 (3.13). pp. 113-122. ISSN 2227-524X
  9. Munshi, Adnan and Sulaeman, Erwin and Omar, Norfazzila and Ali, Mohammad Yeakub (2018) CFD analysis on the effect of winglet cant angle on aerodynamics of ONERA M6 wing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 44-54. ISSN 2289-7879
  10. Mohammed, Mohammed Idris and Mustapha, Faizal/F and Sulaeman, Erwin and Majid, Dayang Laila (2017) Sensor placement based on FE modal analysis: Dynamic characteristic of cable stayed Penang (I) bridge. International Research Journal of Engineering and Technology, 4 (9). pp. 145-151. ISSN 2395-0072 E-ISSN 2395-0056
  11. Mohammed, Mohammed Idris and Sulaeman, Erwin and Mustafa, Faizal and Mohd Ariffin, Mohd Khairol A. (2017) Sensor placement based on static finite element data of cable stayed bridge. International Journal of Emerging Technology and Advanced Engineering, 7 (7). pp. 427-432. E-ISSN 2250-2459
  12. Mohammed, M. I. and Sulaeman, Erwin and Mustapha, F. (2017) Dynamic response for structural health monitoring of the Penang (I) cable-stayed bridge. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Gombak, Kuala Lumpur..
  13. Sulaeman, Erwin and Abdullah, Nur Azam and Kashif, Syed Muhammad (2016) Aeroelastic passive control optimization of supersonic composite wing with external stores. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
  14. UlHaque, Anwar and Asrar, Waqar and Syed Mohamed Ali, Jaffar and Sulaeman, Erwin (2016) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid buoyant aircraft. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 286-291. ISSN 1819-6608
  15. Ahmed, Shugata and Hassan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2016) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences, 11 (1). 297 -302. ISSN 1819-6608
  16. Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Muhammad, Hasibul Hasan (2016) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 331-336. ISSN 1819-6608
  17. Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hassan, Muhammad Hasibul (2016) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 410-414. ISSN 1819-6608
  18. Al Jeroudi, Yazan and Legowo, Ari and Sulaeman, Erwin (2015) Smartphone based classification system for indoor navigation. Applied Mechanics and Materials, 775. pp. 436-440. ISSN 1660-9336
  19. UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Hydrostatic and hydrodynamic characteristics of swimming animals: an inspiration for hybrid buoyant aircraft. In: 4th International Scientific Conference on Applied Sciences and Engineering (4 thISCASE-2015), 3rd-4th Oct. 2015, Langkawi, Malaysia.
  20. Ahmed, Shugata and Hasan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2015) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27 - 28 Oct 2015, Gombak. (Unpublished)

Most Viewed Items

Item titleViews
1Accurate geometric stiffness matrix formulation of beam finite element 1525
2Flutter analysis of supersonic wing with external stores1383
3Analytical Finite Element Formulation of Non-uniform Euler-Bernoulli Beam 1315
4Axial stiffness matrix of non-uniform Bernoulli-Euler bar element 1109
5Alternate approximate function for kernel function of oscillating lifting surfaces1106
6Translation of axis procedure to construct stiffness matrix1015
7Numerical evaluations of hypergeometric cylindrical functions976
8Improved vortex lattice method976
9Improved doublet lattice method974
10Improved doublet point method938
11On the evaluation of negative altitude requirement for flutter speed boundary of transport aircraft and UAV900
12Alternate approximate function for kernel function of planar oscillating lifting surfaces894
13Formulation of kernel function for aerodynamic loading on air vehicle880
14Torsional stiffness matrix of non-prismatic beam elements861
15Aeroelastic stability problem of air vehicle858
16Minimum denominator of rational function843
17Expansion series of continuous function using analytical integration of least square regression832
18Alternate expansion series for the incomplete cylindrical function828
19Analytical derivation of the incomplete cylindrical functions: imaginary part820
20Analytical derivation of the incomplete cylindrical functions: real parts750
21Smartphone based classification system for indoor navigation665
22Aeroelastic tailoring of oscillating supersonic wing with external stores660
23A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications642
24Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap638
25Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins631
26Half model testing for canard of a hybrid buoyant aircraft620
27A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications617
28Aeroelastic flutter analysis of supersonic wing with multiple external stores612
29Mobility determination and estimation based on smartphones-review of sensing and system610
30Modeling and analysis of flutter-based thin-film cantilever microgenerator584