IIUM Repository

Dr Mohd Hafis Sulaiman

Assistant Professor

Department of Manufacturing and Materials Engineering

Kulliyyah of Engineering, International Islamic University Malaysia

Tribology, Metal Forming and Joining, Tool and Die Design, Coating, Textured surface, Finite Element Analysis of manufacturing processes

Research interests: tribology, lubrication, engineered surfaces (ie. texturing, coating), metal forming, joining, tool & presses, friction & wear modelling and virtual manufacturing processes (Finite Element simulation). Feel free to ask me about postgraduate opportunities, and you may contact via my e-mail hafissulaiman@iium.edu.my. View my profile on https://engine.iium.edu.my/tribo-man/

PhD (Mechanical) - Technical University of Denmark (DTU) MEng (Mechanical) - Universiti Teknologi Malaysia (UTM) BEng (Mechanical) - Universiti Teknologi Malaysia (UTM)

Profile Picture

Latest Additions

  1. Al Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Rubaiee, Saeed and Mahfouz, Abdullah and Thompson, Harvey M. and Ali, Sadaqat and Unune, Deepak Rajendra and Sulaiman, Mohd Hafis (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review. Materials, 14 (13).
  2. Sulaiman, Mohd Hafis and raof, Natasha A. and Dahnel, Aishah Najiah (2021) The investigation of PVD coating, cryogenic lubrication and ultrasonic vibration on tool wear and surface integrity in manufacturing processes. Jurnal Tribologi, 28. pp. 105-116. E-ISSN 2289-7232
  3. Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Tribology of Composite Materials and Coatings in Manufacturing. In: Tribological Applications of Composite Materials. Springer, Singapore, pp. 283-308.
  4. Sulaiman, Mohd Hafis, ed. (2019) Proceedings 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP). Tribology & Metal Forming Research Group, Perlis, Malaysia.
  5. Sulaiman, Mohd Hafis and Ridzuan, M. J.M. and Farahana, R. N. and Ayob, Amran and Syahrullail, S. (2013) Paraffinic mineral oil lubrication for cold forward extrusion: effect of lubricant quantity and friction. Tribology International, 60. pp. 111-115. ISSN 0301-679X
  6. Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) The Influence of tool texture on friction and lubrication in strip reduction testing. Lubricants, 5 (3). pp. 1-11. ISSN 2075-4442
  7. Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) Influence of tool texture on friction and lubrication in strip reduction. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-21st September 2017, Cambridge, United Kingdom.
  8. Moghadam, Marcel and Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) Acoustic emission monitoring of the bending under tension test. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-22nd September 2017, Cambridge, United Kingdom.
  9. Sulaiman, Mohd Hafis and R.N, Farahana and Mohd Jamir, Mohd Ridzuan and Mohammad Jaafar, Muhammad Hasnulhadi (2019) Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming. In: 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP), 29 April 2019, Arau, Perlis.
  10. Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) A study of DLC coatings for ironing of stainless steel. In: 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming, 2nd-6th July 2017, Munich, Germany.
  11. Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis and Khasri, Azduwin (2017) The effects of alkali treatment on the mechanical and morphological properties of Pennisetum purpureum/glass-reinforced epoxy hybrid composites. Plastics, Rubber and Composites, 46 (10). pp. 421-430. ISSN 1465-8011 E-ISSN 1743-2898
  12. Sulaiman, Mohd Hafis (2018) Subject Matter Experts Challenge for real-world industrial solutions: Warm forging and stamping to make cost-effective motorcycle sprockets. Other. UNSPECIFIED.
  13. Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Environmental-friendly tribological and lubrication in manufacturing processes. In: 4th International Conference on Sustainable Materials (e-ICoSM) 2020), 3rd September 2020, Pahang. (Unpublished)
  14. Sulaiman, Mohd Hafis (2020) Evaluation of lubricant performance in sheet metal forming. In: Webinar: Tribology as a basis in Condition Base Monitoring, 27th August 2020, Kuala Lumpur. (Unpublished)
  15. Sulaiman, Mohd Hafis and Christiansen, P. and Bay, N. (2018) Measurement of compressibility by means of pressure-bulk modulus relationship for low-to-high viscosity oils. In: Asia International Conference on Tribology 2018, Kuching, Sarawak.
  16. Üstünyagiz, Esmeray and Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Nielsen, Chris Valentin and Bay, Niels (2018) A study on DLC tool coating for deep drawing and ironing of stainless steel. Key Engineering Materials, 767. pp. 181-188. ISSN 1013-9826
  17. Sulaiman, Mohd Hafis and Christiansen, P and Bay, N (2018) A study of anti-seizure tool coatings of ironing of stainless steel. Jurnal Tribologi, 17. pp. 1-14. E-ISSN 2289-7232
  18. Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2019) An experimental compression test of lubricants with direct measurement of lubricant pressure build-up. Jurnal Tribologi, 20. pp. 51-64. ISSN 2289-7232
  19. Sulaiman, Mohd Hafis and R.N., Farahana and L, Tajul and H, Jaafar (2019) The wettability characteristics of DLC coating for tribological engineering applications. In: 6th International Conference on Applications and Design in Mechanical Engineering 2019, ICADME 2019, 26-27 August 2019, Penang.
  20. Sulaiman, Mohd Hafis and Ramli, Nur Farahana and Bienk, K and Nielsen, Chris Valentin and Bay, Niels (2019) Effects of DLC/TiAlN-coated die on friction and wear in sheet-metal forming under dry and oil-lubricated conditions: Experimental and numerical studies. Wear, 438-439. pp. 1-10. ISSN 0043-1648

Most Viewed Items

Item titleViews
1Crack detection on sheared-edge of ultra-high strength steel sheet by using acid immersion144
2Environmental-friendly tribological and lubrication in manufacturing processes132
3Isolation and characterisation of cellulose from cortex, pith and whole of the Pennisetum purpureum: Effect of sodium hydroxide concentration129
4Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming124
5Evaluation of lubricant performance in sheet metal forming122
6The wettability characteristics of DLC coating for tribological engineering applications116
7Influence of tool texture on friction and lubrication in strip reduction112
8The Influence of tool texture on friction and lubrication in strip reduction testing111
9Paraffinic mineral oil lubrication for cold forward extrusion: effect of lubricant quantity and friction109
10A study of anti-seizure tool coatings of ironing of stainless steel104
11Acoustic emission monitoring of the bending under tension test100
12A study of DLC coatings for ironing of stainless steel97
13Effects of DLC/TiAlN-coated die on friction and wear in sheet-metal forming under dry and oil-lubricated conditions: Experimental and numerical studies97
14Tribology of Composite Materials and Coatings in Manufacturing96
15Proceedings 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP)96
16An experimental compression test of lubricants with direct measurement of lubricant pressure build-up94
17A study on DLC tool coating for deep drawing and ironing of stainless steel94
18Measurement of compressibility by means of pressure-bulk modulus relationship for low-to-high viscosity oils93
19The effects of alkali treatment on the mechanical and morphological properties of Pennisetum purpureum/glass-reinforced epoxy hybrid composites87
20The investigation of PVD coating, cryogenic lubrication and ultrasonic vibration on tool wear and surface integrity in manufacturing processes48
21Subject Matter Experts Challenge for real-world industrial solutions: Warm forging and stamping to make cost-effective motorcycle sprockets36
22Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review3