IIUM Repository

Prof Dr Ahmad Faris Ismail

OFFICE OF THE DEPUTY RECTOR (RESEARCH AND INNOVATION)

Profile Picture

Latest Additions

  1. Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil and Mohd Azmi, Mohd Syahriman (2023) Mathematical model development of evacuated glass-thermal absorber tube Collector (EGATC) for air heating application. Journal of Science And Mathematics Letters, 11 (1). pp. 73-82. ISSN 2462-2052 E-ISSN 2600-8718
  2. Zayan, Jalal Mohammed and John, Akbar and Rasheed, Abdul Khaliq and Alallam, Batoul and Khalid, Mohammed and Ismail, Ahmad Faris and Nelson, Bryan Raveen and Salleh, Hamzah Mohd. (2022) Earlier denaturation of DNA by using novel ternary hybrid nanoparticles. IIUM Engineering Journal, 23 (2). pp. 237-245. ISSN 1511-758X E-ISSN 2289-7860
  3. Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2023) A study on accuracy range of multiphase mixture model for turbulent convective heat transfer enhancement simulation of Water-Al2O3 Nanofluid. Journal of Nanofluids, 12 (2). pp. 438-447. ISSN 2169-432X E-ISSN 2169-4338
  4. Al Mahmud, Suaib and Rahman Khan, Mazbahur and Ibne Noor, Wazed and Ismail, Ahmad Faris and Momin, Md. Abdul and Bappy, Jamirul Habib (2022) Turbulent convective heat transfer enhancement modeling of water-Al2O3 nanofluid using CFD mixture model and adaptive neural fuzzy inference system. numerical heat transfer, part b: fundamentals. pp. 1-19. ISSN 1040-7790 E-ISSN 1521-0626 (In Press)
  5. Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Application of TRIZ to modify oven drying for SMEs to maintain the eugenol content in dried cloves. Eastern-European Journal of Enterprise Technologies, 2 (1 (116)). pp. 47-54. ISSN 1729-3774 E-ISSN 1729-4061
  6. Dewanti, Beauty Suestining Diyah and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris (2022) Conduction heat transfer on the porous media in the gap with heater from below. International Journal of Engineering Materials and Manufacture, 7 (2). pp. 43-53. E-ISSN 0128-1852
  7. Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2022) Effects of operating conditions on evaporation rate and wall shear stress development in a micro-gap heat sink with internal micro-fins. CFD Letters, 14 (2). pp. 1-9. ISSN 2811-3969
  8. Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2022) Mixture model for a parametric study on turbulent convective heat transfer of water-Al2O3 nanofluid. CFD Letters, 14 (2). pp. 42-58. ISSN 2811-3969
  9. Al Mahmud, Suaib and Ismail, Ahmad Faris (2021) Multiphase CFD investigation on convective heat transfer enhancement for turbulent flow of water-Al2O3Nanofluid. CFD Letters, 13 (10). pp. 11-24. ISSN 2180-1363
  10. Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2020) A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11th - 14th December 2019, Bangkok, Thailand.
  11. Arifutzzaman, Abul and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Experimental investigation of concentration yields of liquid phase exfoliated graphene in organic solvent media. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.
  12. Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Ismail, Ahmad Faris (2017) Prediction of steam turbine performance as a waste heat recovery mechanism on naturally aspirated spark ignition engine using artificial neural network. In: 2016 3rd International Conference on Soft Computing & Machine Intelligence (ISCMI 2016 ), 23rd-25 November 2016, Dubai, UAE.
  13. Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
  14. Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15-17 Nov 2017, Putrajaya, Malaysia.
  15. Herawan, Safarudin Gazali and Talib, Kamarulhelmy and Putra, Azma and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Musthafah, Mohd Tahir (2018) Prediction of generated power from steam turbine waste heat recovery mechanism system on naturally aspirated spark ignition engine using artificial neural network. Soft Computing, 22 (18). pp. 5955-5964. ISSN 1432-7643 E-ISSN 1433-7479
  16. Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics, 6. pp. 496-504. ISSN 2211-3797
  17. Hawlader, Mohammad Nurul Alam and Baradey, Y. and Ismail, Ahmad Faris and Hrairi, Meftah (2016) Drying of fruits and vegetables: The impact of different drying methods on product quality. In: Advances in Heat Pump-Assisted Drying Technology. Advances in Drying Science & Technology . CRC Press, Boca Raton, Florida, pp. 189-215. ISBN 978-1-4987-3499-8
  18. Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar and Putra, Azma and Musthafah, Mohd Tahir and Awang, Ardika Ridal (2016) Prediction on Power Produced from Power Turbine as a Waste Heat Recovery Mechanism on Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling and Simulation in Engineering, 2016. 5072404-1-5072404-12. ISSN 1687-5591 E-ISSN 1687-5605
  19. Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences, 4. pp. 18-25. E-ISSN 2289-9855
  20. Ahmad, Zuraida and Zain, Saidi and Ismail, Ahmad Faris and Salleh, Md. Noor and Machouche, Salah (2016) Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC), 4. pp. 1-7. E-ISSN 2289-9855

Most Viewed Items

Item titleViews
1The contribution of Hassan al-Rammah to gunpowder and rocket technology1388
2Development of integrated curriculum and teaching materials for science/engineering courses816
3Drying of fruits and vegetables: The impact of different drying methods on product quality810
4Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study806
5Waste heat recovery in heat pump systems: solution to reduce global warming708
6Stability and thermal conductivity enhancement of Carbon nanotube (CNT) nanofluid using gum Arabic 696
7Ibn al-Jazzar on fever679
8Corrosion effects of CNT-nanofluids on different metals677
9Contributions of Ibn Al-Haytham on optics676
10Academic performance measurement: capacity building for OIC-Affiliated Universities663
11Integrating and infusing of Islamic values in the existing engineering course subject: a case study658
12A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles648
13Theoretical and experimental investigation of a novel multistage evacuated solar still644
14Oculist's contributions to cataract operation640
15Employing a failure criterion with interaction terms to simulate the progressive failure of carbon-epoxy laminates633
16Application of nanofluids as coolants in radiator 629
17Design modification of high speed diesel engine to accomodate compressed natural gas627
18Energy particle-physics : the efforts of Abdel Nasser Tawfic625
19Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids621
20A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes620
21Engineering materials and manufacturing processes from Qur'anic perspective620
22Prediction of steam turbine performance as a waste heat recovery mechanism on naturally aspirated spark ignition engine using artificial neural network616
23Combustion processes of rice husks for energy615
24Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy614
25Electron beam crosslinked natural rubber/multiwalled carbon nanotube nanocomposite612
26Analysis of design tool attributes with regards to sustainability benefits612
27A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method606
28Application of CNT nanofluids in a turbulent flow heat exchanger598
29Thermal conductivity of carbon nanotube nanofluid—experimental and theoretical study590
30Al-Razi's contribution to the study of nexus between human mind and body589