IIUM Repository

Dr. Tasnim Firdaus Ariff

Associate Professor

Department of Manufacturing and Materials Engineering

KULLIYYAH OF ENGINEERING

Microwave sintering, Eco-friendly Machining, Hybrid Bio composite

Profile Picture

Latest Additions

  1. Ariff, Tasnim Firdaus and Ismail, Ummu Aisyah (2025) Reducing tool wear with hybrid microwave treated TiCN coated tool and recycled cooking oil in MQL machining of T6061 aluminium alloy. Jurnal Kejuruteraan, 37 (1). pp. 499-506. ISSN 0128-0198 E-ISSN 2289-7526
  2. Ariff, Tasnim Firdaus and Sakib, Mohammad Nazmus (2024) Machinability of Inconel 718 in MQL turning using hybrid microwaved silicon nitride inserts. Jurnal Tribologi, 42. pp. 216-230. ISSN 2289-7232 E-ISSN 2289-7232
  3. Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672
  4. El-Sayed, Mohamed Hassan Attia and Ariff, Tasnim Firdaus and Noor Awalludin, Muhammad Mukhtar (2023) Development of framework for the management, handling system and maintenance in using hydrosurgery at hospitals. In: WJTA Conference and Expo 2023, 31 October - 1 November 2023, New Orleans, Louisiana.
  5. Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.
  6. Ariff, Tasnim Firdaus and Zakaria, Azriena Nathasa (2023) Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, KualaLumpur.
  7. Mohamed Ariff, Tasnim Firdaus and Sayadek, Mohd Shahril (2023) Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), Langkawi Island, Malaysia.
  8. Alawbali, Rakan Hatem Abbas and Mohamed Ariff, Tasnim Firdaus (2023) Enhancing the tool life of aluminium oxide (Al2O3) inserts using hybrid microwave energy in dry machining of high strength steel (KRUPP 6582). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.
  9. Johar, Firdaus and Ariff, Tasnim Firdaus (2022) Mechanical and microstructural properties of hybrid bio-composites using microwaved coconut fibre and rice husk. In: 2nd International Conference on Recent Trends in Applied Research, ICoRTAR 2021, 8-9 October 2021, Online.
  10. Ariff, Tasnim Firdaus and Al-Qwairi, Osamah Omar (2020) Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding. TEST Engineering and Management, 83 (May – June 2020). 1446 -1450. ISSN 0193-4120
  11. Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622
  12. Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)
  13. Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181
  14. Konneh, Mohamed and Bagum, Mst. Nasima and Mohamed Ariff, Tasnim Firdaus and Yeakub Ali, Mohammad (2017) Machinability of soda lime glass in high speed end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.
  15. Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Mohamed Ariff, Tasnim Firdaus (2018) Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.
  16. Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.
  17. Amin, A. K. M. Nurul and Begum, Mst. Nasima and Fathiah, Noor and Konneh, Mohamed and Ariff, Tasnim Firdaus (2016) An experimental approach to determine the critical depth of cut in brittle-to-ductile phase transition during end milling of soda lime glass. Arabian Journal for Science and Engineering, 41 (11). pp. 4553-4562. ISSN 1319-8025 E-ISSN 2191-4281
  18. Ariff, Tasnim Firdaus and Tukiman, Nurul Hannah Atikah and Bahar, Rubina (2016) Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, 12-14 Nov 2015, Kuala Lumpur.
  19. Mohamed Ariff, Tasnim Firdaus and Zakaria, Zairul Azrul (2015) Enhanced heating mechanism of the electric metal melting furnace in traditional foundry. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 9659-9663. ISSN 1819-6608
  20. Iqbal, Mohammad and Ariff, Tasnim Firdaus and Mat Roseh, Mohd Shahrul Fahmi and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and -, Suryanto (2015) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. Advanced Materials Research, 1115. pp. 59-63. ISSN 1022-6680

Most Viewed Items

Item titleViews
1Study of TiC cutting tool insert using microwave synthesis947
2Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP)908
3Synthesis of pewter alloy from tin–copper–antimony powder mixtures by microwave and conventional sintering869
4Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia860
5The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering855
6Enhanced heating mechanism of the electric metal melting furnace in traditional foundry845
7Economic analysis of using e-glass composite wrap repair system for pipelines in Malaysia836
8An experimental approach to determine the critical depth of cut in brittle-to-ductile phase transition during end milling of soda lime glass835
9Design improvements in the inner shell of a motorbike helmet using coconut fiber composite826
10Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts824
11The development of strategies for lean operations in SMIs817
12Machinability of soda lime glass in high speed end milling808
13Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718808
14Dry machining of brass using titanium carbonitride (TiCN) coated tool 785
15Effect of microwave sintering on the mechanical and structural properties of pewter alloy782
16Dry machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools778
17Cost analysis of using hybrid microwave post-sintered silicon nitride inserts774
18Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding774
19Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations769
20Dry machining of T6061 aluminium alloy using titanium nitride (TiN)and titanium carbonitride (TiCN) coated tools769
21Tool wear mechanisms during cutting of soda lime glass744
22Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools741
23Improving efficiency and enhancing productivity in transporting fertilizers by using conveyor belt cleaners738
24Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering724
25Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering721
26Design improvements in underground watering system for small local farming industries715
27Wear analysis of Silicon Nitride (Si3N4) cutting tool in dry machining of T6061 Aluminium Alloy714
28The effect of powder sintering method on the densification and microstructure of pewter alloys 702
29Making the lean manufacturing supply chain leap across small and medium scale industries (SMIs) in Malaysia700
30Enhancing mechanical and structural properties of TiC inserts using microwave energy699