IIUM Repository (IREP)

Dr Muataz Hazza Alhazza

Profile Picture

Latest Additions

  1. Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2018) Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)
  2. Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Amalina (2018) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)
  3. Siddique, Istiaq Jamil and Bahar, R. and Ibrahim, Shaliza and Al Hazza, Muataz Hazza Faizi (2018) Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study. Desalination and Water Treatment, 127. pp. 255-261. ISSN 1944-3994
  4. Abdul Rahman, Nur Salihah and Al Hazza, Muataz Hazza Faizi and Kays, Emrul (2018) Minimizing makespan of multimachine production system in flow shop environment by means of mixed integer programming model. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1101-1110. ISSN 0976-6340
  5. Al Hazza, Muataz Hazza Faizi and Zainal, Nur Izzati Zainal and Rodzi, Mohd Zuhaili Mohd (2018) Development of FRID based 2d localization simulation for autonomous guided vehicle tracking in indoor environment. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 496-507. ISSN 0976-6340
  6. Bourini, Islam Faisal and Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem (2018) Investigation of effect of machine layout on productivity and utilization level: what if simulation approach. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 32-40.
  7. Shahlan, M. Z. and Sidek, Ayu Aszliana and Suffian, S A and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi (2018) An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.
  8. Endut, N A and Al Hazza, Muataz Hazza Faizi and Abdullah Sidek, 'Atiah and Adesta, Erry Yulian Triblas and Ibrahim, N A (2018) Compressive behaviour and energy absorption of aluminium foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
  9. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdullah Sidek, 'Atiah and Endut, N A (2018) A study of tensile test on open-cell aluminum foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
  10. Al Hazza, Muataz Hazza Faizi and Elbishari, E M Y and Ismail, Md Yusof and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2018) Productivity improvement using discrete events simulation. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
  11. Elbishari, Elhassan M Y and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2017) An integrated approach for facilities planning by ELECTRE method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.
  12. Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad and Hasim, Siti Fatihah and Che Daud, Mohd Radzi (2017) A study on capabilities of different electrode materials during electrical discharge machining (EDM). IIUM Engineering Journal, 18 (2). pp. 189-195. ISSN 1511-788X
  13. Al Hazza, Muataz Hazza Faizi and Abu Bakar, Any Nabila and Adesta, Erry Yulian Triblas and Taha, Assem Hatem (2017) Empirical study on AGV guiding in indoor manufacturing system using color sensor. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..
  14. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Simulation of real time tracking system using RFID technology to enhance quality activities in flexible manufacturing system. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..
  15. Ibrahim, Nur Asmawiyah and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Asman, Asyfiq Hanif (2017) Experimental study of stress-strain behaviour of open-cell aluminium foam sandwich panel for automotive structural part. International Journal of Engineering Materials and ManufactureInternational Journal of Engineering Materials and Manufacture, 2 (2). pp. 25-30.
  16. Taha, Assem Hatem and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Modelling and analysing deadlock in flexible manufacturing system using timed petri net. International Journal of Engineering Materials and Manufacture, 2 (1). pp. 11-15. ISSN 0128-1852
  17. Al Hazza, Muataz Hazza Faizi and Any Nabila, Bt Abu Bakar and Taha, Assem Hatem and Adesta, Erry Yulian Triblas (2016) Real time handling system to enhance the productivity based on the layout improvement. International Review on Modelling and Simulations (I.RE.MO.S.), 9 (6). pp. 459-463. ISSN 1974-9821
  18. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and Mohammad Yuhan, Suprianto (2012) Surface roughness optimization in end milling using the multi objective genetic algorithm approach. Advanced Materials Research, 576. pp. 103-106. ISSN 1022-6680
  19. Ndaliman, Mohammed Baba and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad (2012) Development of a new model for predicting EDM properties of Cu-TaC compact electrodes based on artificial neural network method. Australian Journal of Basic and Applied Sciences, 6 (13). pp. 192-199. ISSN 1991-8178
  20. Al Hazza, Muataz Hazza Faizi and Mohmad Bakhari, Nur Amirah Najwa (2016) Optimization of cutting parameters to minimize tooling cost in high speed turning of SS304 using coated carbide tool using genetic algorithm method. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 11-15. ISSN 0128-1852

Most Viewed Items

Item titleViews
1Tool life modeling in high speed turning of AISI 4340 hardened steel with mixed ceramic tools by using face central cubic design 1142
2Experimental Investigation of the Effect of Feed Rate and Negative Tool Rake Angle in High Speed Hard Turning1100
3Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method1087
4Design a tacit knowledge sharing system1056
5Flank wears simulation by using back propagation neural network when cutting hardened H-13 steel in CNC End Milling1048
6The economic impact of using negative rake angle in high speed hard turning 1029
7Experimental study of flank wear in high speed turning of stainless steel AISI 3041025
8Simulating the electrical and thermal conductivity in EDM die sinking of Cu-TaC compact electrodes using neural network937
9Surface roughness modeling for CNC end milling using artificial neural network 925
10Simulation of tool life for ceramic with negative rake angle using neural network 914
11Predicting surface roughness with respect to process parameters using Regression Analysis Models in end milling794
12Formulation of integer programming model for balancing and scheduling of production line having shared resources 782
13Power Consumption Optimization in CNC Turning Process Using Multi Objective Genetic Algorithm776
14Prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened H-13 steel in CNC end milling747
15Cutting temperature and surface roughness optimization in CNC end milling using multi objective genetic algorithm718
16prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened h-13 steel in CNC end milling686
17Flank wear modeling in high speed turning679
18ANN modeling of nickel base super alloys for time dependent deformation672
19Decision Based Fuzzy Rules for RFID Implementation in Supply Chain Management667
20Surface roughness modeling in high speed hard turning using regression analysis661
21Tensile parameters evaluation of two solid solution super alloys by ANN modeling 627
22Using the desirability function as an effective tool in target costing model 615
23The development of cost structuring of high speed hard turning601
24Review on the theory of attractive quality kano model590
25Machining time stimulating in high speed hard tuning584
26Multi objective optimisation for high speed end milling using simulated annealing algorithm 577
27Energy cost optimization in high speed hard turning using simulated annealing algorithm564
28Evaluating delamination at entry of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills 558
29The Development of Cost Structure for High Speed Hard Turning549
30Surface roughness prediction in high speed end milling using adaptive neuro-fuzzy inference system 513