IIUM Repository

Dr. Norhashimah Shaffiar

Profile Picture

Latest Additions

  1. Syed Shaharuddin, Sharifah Imihezri and Fauzan, Amirul Akmal and Mohamad Jazi, Mohamad Faris Izzudin and Mohd Akhir, Nur Atiqah and Othman, Maizatulnisa and Muhamad Khairussaleh, Nor Khairushima and Shaffiar, Norhashimah and Hassan, Zaimah (2020) Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2). pp. 197-211. ISSN 1511-788X E-ISSN 2289-7860
  2. Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abdul Malek (2019) Finite element analysis (FEA) of polylactic cid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5). pp. 678-691. ISSN 1757-9864
  3. Mohd Akhir, Nur Atiqah and Syed Shaharuddin, Sharifah Imihezri and Buys, Yose Fachmi and Othman, Maizatulnisa and Shaffiar, Norhashimah (2019) Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019, 27th-29th November 2018, Penang.
  4. Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abd. Malek and Syed Shaharuddin, Sharifah Imihezri (2018) Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,, 19-20 September 2018, Kuala Lumpur, Malaysia.
  5. Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek (2018) Graphical vs. nongraphical displays: which one is the best labeling system for laboratory searching task? Human Factors and Ergonomics Journal, 3 (1). pp. 26-33. E-ISSN 2590-3750
  6. Adnan, Ammar and H., Hanafi and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek and Ani, Mohd Hanafi (2018) Effect of hatched marking length on entering position among motorcyclists during merging in expressway. Science Intaernational (Lahore), 30 (3 (May-June)). pp. 451-454. ISSN ISSN 1013-5316
  7. Ammar, Adnan and H., Ismail and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Mohd Hanafi, Ani and Abdul Hamid, Abd. Malek (2018) Relationship between merging lane length and motorcyclist’s head check behavior during merging in expressway. Sci.Int.(Lahore), 30 (3). pp. 461-466. ISSN 1013-5316
  8. Roslan, Muhamad Fahmi Mohd and Shaffiar, Norhashimah and Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2018) Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Gombak, Kuala Lumpur.
  9. Shaffiar, Norhashimah and Hasnan, M.A. and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2015) Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. Advanced Materials Research, 1115. pp. 410-413. ISSN 1022-6680
  10. Shaffiar, Norhashimah and Abdul Halim, Mohamad Khairi and Anuar, Hazleen and Majid, M. A. H. A. (2015) Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. Advanced Materials Research, 1115. pp. 414-417. ISSN 1022-6680
  11. Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. and Tamin, M.N. (2010) Continuum damage evolution in pb-free solder joint under shear fatigue loadings. In: 12th Electronics Packaging Technology Conference, 8th - 10th December 2010 , Singapore .
  12. Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. (2010) Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package. In: 34th International Electronics Manufacturing Technology Conference (IEMT 2010), 30th - 2nd November 2010 , Melaka.
  13. Yamin, A.F.M. and Shaffiar, Norhashimah and Loh, W.K. and Tamin, M.N. (2011) Damage progression in BGA solder joints during board-level drop test. In: 13th Electronics Packaging Technology Conference (EPTC 2011), 7th - 9th December 2011 , Singapore.
  14. Tamin, M.N. and Shaffiar, Norhashimah (2014) Solder joint reliability assessment: finite element simulation methodology. Advanced Structured Materials Series, 37 . Springer International Publishing, Switzerland. ISBN 978-3-319-00091-6, 978-3-319-00092-3 (eBook)
  15. Shaffiar, Norhashimah and Abdul Halim, Mohamad Khairi and Anuar, Hazleen and Majid, M. A. H. A. (2015) Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23 - 25 Sep 2014, Kuala Lumpur.
  16. Shaffiar, Norhashimah and Hasnan, M.A. and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2015) Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. In: International Conference on Advanced Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23– 25 Sep 2014, Kuala Lumpur.
  17. Prawoto, Yunan and Djuansjah, J.R.P. and Shaffiar, Norhashimah (2012) 3D modeling of austenite based on real microstructure. In: 4th International Conference on Computational Methods (ICCM2012), 25th-28th Nov. 2012, Crown Plaza Surfers Paradise, Gold Coast, Australia. (Unpublished)
  18. Shaffiar, Norhashimah and Yamin, A.F.M. and Loh, W.K. and Tamin, M.N. (2012) Fatigue failure processes in pb-free solder joints using continuum damage and cohesive zone models. In: Proceedings of the 2012 IEEE 14th Electronics Packaging Technology Conference, EPTC 2012, 5th-7th Dec 2012 , Singapore.
  19. Yamin, A.F.M. and Shaffiar, N.M. and Loh, W.K. and Tamin, M.N. (2012) Extended cohesive zone model for simulation of solder/IMC interface cyclic damage process in pb-free solder interconnects. In: Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, 6th-8th Nov 2012, Ipoh, Perak.
  20. Shaffiar, Norhashimah and Laib, Z. B. and Tam, M. N. (2011) Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-63. pp. 1409-1414. ISSN 1013-9826

Most Viewed Items

Item titleViews
1Solder joint reliability assessment: finite element simulation methodology1159
2Re-visiting the ‘rule of mixture’ used in materials with multiple constituting phases: A technical note on morphological considerations in austenite case study1117
3Extended cohesive zone model for simulation of solder/IMC interface cyclic damage process in pb-free solder interconnects1013
4Damage mechanics model for solder/intermetallics interface fracture process in solder joints981
5Fatigue failure processes in pb-free solder joints using continuum damage and cohesive zone models978
6Damage progression in BGA solder joints during board-level drop test929
7Continuum damage evolution in pb-free solder joint under shear fatigue loadings877
8Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package865
93D modeling of austenite based on real microstructure809
10Fatigue fracture process of lead-free solder joints in BGA package787
11Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite784
12Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading737
13Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading699
14Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite633
15Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS)463
16Effect of hatched marking length on entering position among motorcyclists during merging in expressway407
17Graphical vs. nongraphical displays: which one is the best labeling system for laboratory searching task?367
18Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method340
19Relationship between merging lane length and motorcyclist’s head check behavior during merging in expressway333
20Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process209
21Finite element analysis (FEA) of polylactic cid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery180
22Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology70