IIUM Repository

Dr. A.K.M. Nurul Amin

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Bagum, Nasima and Amin, A. K. M. Nurul and Konneh, Mohamed and Mohd Zaib, Noor Fathiah (2015) Multi-response optimizations for high speed ductile mode machining of soda lime glass. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17341-17350. ISSN 1819-6608
  2. Amin, A. K. M. Nurul and Arif, Muammer Din and Subir, Siti Aminatuzzuhriyah B. Haji and Abdullah, Fawaz Mohsen (2015) Magnetic damping in turning of stainless steel aisi 304 for the reduction of machining vibration and tool wear. Advanced Materials Research, 1115. pp. 100-103. ISSN 1662-8985
  3. Amin, A. K. M. Nurul and Omar, A.A. Che and Kamal, M.A.Mohammed and Nassar, Mahmoud M.A. and Zaib, N.F. Mohd and Arif, Muammer Din (2015) Effect of cutter diameters on surface roughness attained in high speed end milling of soda lime glass. Advanced Materials Research, 1115. pp. 51-54. ISSN 1662-8985
  4. Amin, A. K. M. Nurul and Omar, A.A. Che and Kamal, M.A. Mohammed and Nassar, Mahmoud M.A. and Mohd Zaib, Noor Fathiah and Arif, Muammer Din (2015) Achievement of ductile regime machining in high speed end milling of soda lime glass by using tungsten carbide tool insert. Advanced Materials Research, 1115. pp. 39-42. ISSN 1662-8985
  5. Amin, A. K. M. Nurul and Subir, Siti Aminatuzzuhriyah B. Haji and Arif, Muammer Din (2015) Optimization of Tool Wear using Coupled RSM-GA Approach in Turning of Stainless Steel AISI 304 with Magnetic Damping of Tool Shank. Advanced Materials Research, 1115. pp. 117-121. ISSN 1662-8985
  6. Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2014) Heat-assisted machining. In: Comprehensive Materials Processing. Advanced Machining Technologies, 11 . Elsevier Ltd., Amsterdam, pp. 297-331. ISBN 9780080965338
  7. Amin, A. K. M. Nurul and Lajis, M. A. and Ismail, Ahmad Faris (2014) A Method and an Apparatus for Machining a Tool Steel. MY-152227-A.
  8. Amin, A. K. M. Nurul and Mohamad, Ummu Atiqah Khairiyah and Arif, Muammer Din (2014) Implementation of magnetic damping to reduce chatter amplitude and tool wear during turning of stainless steel AISI 304. Applied Mechanics and Materials, 607. pp. 171-175. ISSN 1660-9336
  9. Amin, A. K. M. Nurul and Nassar, Mahmoud M.A. and Arif, Muammer Din (2014) Optimization of surface roughness in micro-high speed end milling of soda lime glass using uncoated tungsten carbide tool with compressed air blowing. Applied Mechanics and Materials, 607. pp. 103-107. ISSN 1660-9336
  10. Amin, A. K. M. Nurul and Alam, Md. Shah (2012) High speed machining of titanium alloy, Ti6Al4V to achieve nano level surface roughness. LAP LAMBERT Academic Publishing , Saarbrücken, Germany. ISBN 9783659219597
  11. Amin, A. K. M. Nurul (2012) Heat assisted machining of hardened steel AISI H13 for longer tool life and higher efficiency in die and mould making. LAP LAMBERT Academic Publishing , Saarbrücken, Germany. ISBN 9783845422046
  12. Solihin, Sohirin Mohammad (2013) Mohammad Natsir: intellectualism and activism in modern age. IIUM Press, Kuala Lumpur. ISBN 9789674182410
  13. Amin, A. K. M. Nurul and Mahmoud, Abdelgadir Mohamed (2013) Chatter control in induction heat assisted end milling: to improve machinability of stainless steel and medium carbon steels. LAP LAMBERT Academic Publishing , Saarbrucken, Germany. ISBN 978-3-659-43654-3
  14. Amin, A. K. M. Nurul and Md. Saad, Muhd Hafiz and Arif, Muammer Din (2012) Modeling and optimization of surface roughness and vibration amplitude in heat assisted end milling of SKD 11 tool steel using ball nose tool. Advanced Materials Research, 538-41. pp. 799-803. ISSN 1022-6680
  15. Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2013) Heat assisted machining of metals and alloys using induction heating method. In: International Conference on Engineering Research Innovation & Education (ICERIE 2013), 11 - 13 January 2013, Bangladesh.
  16. Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2010) Identification of instabilities of the chip formation and it's prediction model during end milling of medium carbon steel (S45C). American Journal of Applied Sciences , 3 (1). pp. 193-200. ISSN 1554-3641(O), 1546-9239 (P)
  17. Ginta , Turnad L. and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Mohd Radzi, H.C.D. (2009) Improved tool life in end milling ti-6al-4v through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X
  18. Turnad L., Ginta and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in end milling titanium alloy (Ti-6Al-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785
  19. Amin, A. K. M. Nurul and Dolah, Shuriani and Mahmud, Marlina and Lajis, M. A. (2008) Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2. Journal of Materials Processing Technology, 201. pp. 466-470. ISSN 0924-0136
  20. A.K.M., Nurul Amin and Abraham, Irwan and Nor, Khairusshima and Ahmed, Mirghani Ishak (2007) Influence of preheating on performance of circular carbide inserts in end milling of carbon steel. Journal of Materials Processing Technology, 185 (1-3). pp. 97-105. ISSN 0924-0136

Most Viewed Items

Item titleViews
1Improved tool life in end milling Ti-6A1-4V through workpiece preheating1566
2Hot machining of hardened steels with coated carbide inserts1398
3The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating1279
4Role of discrete nature of chip formation and natural vibrations of system components in chatter formation during metal cutting1237
5 Cutting force and tool life models in end milling titanium alloy ti-4al-4v with thermally-assisted machining 1212
6Machinability aspects in heat assisted machining of hardened steel AISI H13 using coated carbide tool1169
7Wear mechanism in end milling of Inconel 7181164
8Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining1152
9Investigation of the machinability of Inconel 718 in room temperature and preheated conditions1140
10The effect of cryogenic cooling in machinability of stainless steel during turning1122
11Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts1119
12Role of chip serration frequency in chatter formation during end milling operation of stainless steel1103
13Prediction and investigation of surface quality in high speed end-milling of silicon to eliminate conventional finishing operations1061
14The method of chatter suppression in end milling operation1059
15Modeling of surface roughness during end milling of AISI H13 hardened tool steel1049
16Tool life prediction by response surface methodology in end milling Titanium alloy Ti-6Al-4V using uncoated wc-co inserts1044
17Modelling of tool life by response surface methodology in hard milling of AISI D2 tool steel1043
18Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel1036
19Development of a mathematical model for the prediction of surface roughness in end milling of stainless steel SS 3041030
20Improvement of surface roughness in end milling of Ti6Al4V by coupling RSM with genetic algorithm1020
21Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis1010
22Heat assisted machining of metals and alloys using induction heating method1000
23Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating1000
24Development of a novel zero point setting device for high speed and micro machining applications996
25Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology994
26Development of tool life prediction model of TiAlN coated tools during the high speed hard milling of AISI H13 steel994
27Influence of chatter on tool life during end milling of Aluminium and Aluminium alloy on vertical machining centre (VMC)993
28Comparison of machinability of ceramic insert in room temperature and cryogenic cooling conditions during end milling inconel 718987
29Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020973
30Optimization of surface roughness in high speed end milling of Titanium alloy Ti-6Al-4V under dry conditions972