Experimental analysis and modeling of the crushing of honeycomb cores

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques and Thevenet, Pascal (2005) Experimental analysis and modeling of the crushing of honeycomb cores. Applied Composite Materials, 12. pp. 213-227. ISSN 0929-189X

PDF (applied composites materials) - Published Version Restricted to Repository staff only Download (654kB) | Request a copy

Abstract

In the aeronautical field, sandwich structures are widely used for secondary structures like flaps or landing gear doors. The modeling of low velocity/low energy impact, which can lead to a decrease of the structure strength by 50%, remains a designer’s main problem. Since this type of impact has the same effect as quasi-static indentation, the study focuses on the behavior of honeycomb cores under compression. The crushing phenomenon has been well identified for years but its mechanism is not described explicitly and the model proposed may not satisfy industrial purposes. To understand the crushing mechanism, honeycomb test specimens made of Nomex™, aluminum alloy and paper were tested. During the crushing, a CCD camera showed that the cell walls buckled very quickly. The peak load recorded during tests corresponded to the buckling of the common edge of three honeycomb cells. Further tests on corner structures to simulate only one vertical edge of a honeycomb cell show a similar behavior. The different specimens exhibited similar load/displacement curves and the differences observed were only due to the behavior of the different materials. As a conclusion of this phenomenological study, the hypothesis that loads are mainly taken by the vertical edge can be made. So, a honeycomb core subjected to compression can be modeled by a grid of nonlinear springs. A simple analytical model was then developed and validated by tests on Nomex™ honeycomb core indented by different sized spherical indenters. A good correlation between theory and experiment was found. This result can be used to satisfactorily model using finite elements the indentation on a sandwich structure with a metallic or composite skin and honeycomb core.

Item Type:	Article (Journal)
Uncontrolled Keywords:	sandwich structure, honeycomb, indentation, low energy/low velocity impact
Subjects:	T Technology > TJ Mechanical engineering and machinery
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering > Department of Mechanical Engineering
Depositing User:	Prof Dr Ing yulfian aminanda
Date Deposited:	10 Jan 2012 19:10
Last Modified:	10 Jan 2012 19:10
URI:	http://irep.iium.edu.my/id/eprint/6286

Actions (login required)

View Item