Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Sutjipto, Agus G. (2007) Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts. In: International Conference on Mechanical Engineering (ICME07), 29-31 December 2007, Dhaka, Bangladesh.

PDF (Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts) - Published Version Restricted to Registered users only Download (258kB) | Request a copy

Abstract

This paper presents an approach to establish models for tool life in end milling of titanium alloy Ti–6Al– 4V using uncoated carbide inserts under dry conditions. Small central composite design (CCD) was employed in developing the tool life model in relation to primary cutting parameters such as cutting speed, axial depth of cut and feed. Flank wear has been considered as the criteria for tool failure and the wear was measured under a Hisomet II Toolmaker’s microscope. Further testing was stopped and an insert rejected when an average flank wear greater than 0.30 mm was achieved. Design-expert version 6.0.8 software was applied to establish the first-order and the second-order model and develop the contours. The adequacy of the predictive model was verified using analysis of variance (ANOVA) at 95% confidence level.

Item Type:	Conference or Workshop Item (Full Paper)
Additional Information:	4289/26888
Subjects:	T Technology > T Technology (General) > T55.4 Industrial engineering.Management engineering. T Technology > T Technology (General) > T55.4 Industrial engineering.Management engineering. > T58.7 Production capacity. Manufacturing capacity
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button):	Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering
Depositing User:	Prof. Dr. A. N. Mustafizul Karim
Date Deposited:	12 Sep 2013 10:44
Last Modified:	12 Sep 2013 10:44
URI:	http://irep.iium.edu.my/id/eprint/26888

Actions (login required)

View Item