IIUM Repository

Items where Author is "Saleh , Tanveer "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 92.

Article

Razib, Mohd Asyraf and Saleh, Tanveer and Rana, Masud and Islam, Saiful and Muthalif, Asan G. A. (2023) Surface roughness modelling of the micromechanically patterned CNT forests. Micro and Nanosystems. pp. 1-10. ISSN 1876-4029 E-ISSN 1876-4037

Hasan, Mohammad Mainul and Saleh, Tanveer and Sophian, Ali and Rahman, M. Azizur and Huang, Tao and Mohamed Ali, Mohamed Sultan (2023) Experimental modeling techniques in electrical discharge machining (EDM): a review. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 E-ISSN 1433-3015 (In Press)

Rahman, M Azizur and Saleh, Tanveer and Jahan, Muhammad Pervej and McGarry, Conor and Chaudhari, Akshay and Huang, Rui and Tauhiduzzaman, M and Ahmed, Afzal and Mahmud, Abdullah Al and Bhuiyan, Md. Shahnewaz and Khan, Md Faysal and Alam, Md. Shafiul and Shakur, Md Shihab (2023) Review of intelligence for additive and subtractive manufacturing: current status and future prospects. Micromachines, 14 (3). pp. 1-53. E-ISSN 2072-666X

Saleh, Tanveer and Antong, Hasmawati and Haja Mohideen, Ahmad Jazlan and Jasni, Farahiyah and Abdul Hamid, Syamsul Bahrin and Md. Yusof, Hazlina (2022) Mechatronics Engineering Department Newsletter - Risalah Issue 2. Mechatronics Engineering Department Newsletter - Risalah Issue 2 October 2022 (2). E-ISSN 2805-5144

Hasan, Mohammed Nazibul and Asri, Muhammad Izzudin Ahmad and Saleh, Tanveer and Muthalif, Asan G. A. and Ali, Mohamed Sultan Mohamed (2022) Wearable thermoelectric generator with vertically aligned PEDOT:PSS and carbon nanotubes thermoelements for energy harvesting. International Journal of Energy Research. ISSN 0363907X (In Press)

Daud, Noor Dzulaikha and Hasan, Md. Nazibul and Saleh, Tanveer and Leow, Pei Ling and Ali, Mohamed Sultan Mohamed (2022) Non‑traditional machining techniques for silicon wafers. The International Journal of Advanced Manufacturing Technology, 2022 (121). pp. 29-57.

Wan Azhar, Wan Ahmad and Saleh, Tanveer and Razib, Mohd Asyraf (2022) Application of CANFIS for modelling and predicting multiple output performances for different materials in μEDM. CIRP Journal of Manufacturing Science and Technology, 37. pp. 528-546. ISSN 1755-5817 (In Press)

Mollik, Md Shohag and Saleh, Tanveer and Nor, Khairul A.M. and Mohamed Ali, Mohamed Sultan (2021) A machine learning-based classification model to identify the effectiveness of vibration for µEDM. Alexandria Engineering Journal. pp. 1-11. ISSN 1110-0168 E-ISSN 2090-2670 (In Press)

Noor, Wazed Ibne and Saleh, Tanveer and Rashid, Mir Akmam Noor and Ibrahim, Azhar Mohd and Ali, Mohamed Sultan Mohamed and UNSPECIFIED (2021) Dual-stage artificial neural network (ANN) model for sequential LBMM-μEDM-based micro-drilling. The International Journal of Advanced Manufacturing Technology. pp. 1-24. ISSN 0268-3768 E-ISSN 1433-3015

Rashid, Mir Akmam Noor and Saleh, Tanveer and Noor, Wazed Ibne and Ali, Mohamed Sultan Mohamed (2021) Effect of laser parameters on sequential laser beam micromachining and micro electro-discharge machining. The International Journal of Advanced Manufacturing Technology, 114. pp. 709-723. ISSN 0268-3768

Daud, Noor Dzulaikha and Ghazali, Farah Afiqa Mohd and Hamid, Fatimah Khairiah Abd and Nafea, Marwan and Saleh, Tanveer and Leow, Pei Ling and Ali, Mohamed Sultan Mohamed (2021) Heat-assisted μ-electrical discharge machining of silicon. International Journal of Advanced manufacturing Technology. pp. 1-12. ISSN 0268-3768 E-ISSN 1433-3015 (In Press)

Murshiduzzaman, Murshiduzzaman and Saleh, Tanveer and Khan, Md. Raisuddin (2019) Modular robotic platform for autonomous machining. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 E-ISSN 1433-3015 (In Press)

Islam, Saiful and Saleh, Tanveer and Mohd Razib, Mohd Asyraf and Mohamed Ali, Mohamed Sutan (2019) An ex-situ method to convert vertically aligned carbon nanotubes array to horizontally aligned carbon nanotubes mat. Materials Research Express, 6 (2). pp. 1-8. E-ISSN 2053-1591

Jarin, Sams and Saleh, Tanveer (2019) Artificial neural network modelling and analysis of carbon nanopowder mixed micro wire electro discharge machining of gold coated doped silicon. International Journal of Materials Engineering Innovation, 10 (4). pp. 346-363. ISSN 1757-2754 E-ISSN 1757-2762

Rehman, Tariq and Nafea, Marwan and Faudzi, Ahmad Athif and Saleh, Tanveer and Mohamed Ali, Mohamed Sultan (2019) PDMS-based dual-channel pneumatic micro-actuator. Smart Materials and Structures, 28 (11). pp. 1-11. ISSN 0964-1726 E-ISSN 1361-665X

Mohd Asyraf, Mohd Razib and Saleh, Tanveer (2019) A review on micro-patterning processes of vertically aligned carbon nanotubes array (VACNTs Array). Current Nanoscience, 15 (4). pp. 328-353. ISSN 1573-4137

Jarin, Sams and Saleh, Tanveer and Muthalif, Asan G. A. and Ali, Mohammad Yeakub and Bhuiyan, Moinul (2018) Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining. International Journal of Advanced Manufacturing Technology, 99 (9). pp. 3005-3015. ISSN 0268-3768 E-ISSN 1433-3015

Mohd Razib, Mohd Asyraf and Saleh, Tanveer and Islam, Saiful and Rana, Masud and Abdul Muthalif, Asan Gani (2018) Optical characterization of tip bended vertically aligned carbon nanotubes array. Chemical Physics Letters, 711. pp. 37-41. ISSN 0009-2614

Selvan, Krishna Veni and Rehman, Tariq and Saleh, Tanveer and Mohamed Ali, Mohamed Sultan (2018) Copper–cobalt thermoelectric generators: power improvement through optimized thickness and sandwiched planar structure. IEEE Transactions on Electron Devices, 66 (8). pp. 3459-3465. ISSN 0018-9383 E-ISSN 1557-9646

Amanullah Tomal, Abu Naser Mohammad and Saleh, Tanveer and Khan, Md. Raisuddin (2018) Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish. IIUM Engineering Journal, 19 (2). pp. 221-231. ISSN 1511-788X E-ISSN 2289-7860

Ahmed Azmi, Mohamed Dalol and Saleh, Tanveer (2017) Concept of a programmable fixture for 3-Axis CNC. International Journal of Engineering Materials and Manufacture, 2 (3). pp. 49-57. E-ISSN 0128-1852

Mohd Razib, Mohd Asyraf and Rana, Masud and Saleh, Tanveer and Fan, Harrison and Koch, Andrew and Nojeh, Alireza and Takahata, Kenichi and Asan Gani, Abdul Muthalif (2017) Optical anisotropy in micromechanically rolled carbon nanotube forest. Electronic Materials Letters, 13 (5). pp. 442-448. ISSN 1738-8090 E-ISSN 2093-6788

Rana, M. Masud and Saleh, Tanveer and Mohd Asyraf, Mohd Razib and Muthalif, Asan G. A. (2017) Empirical modeling of micromechanical bending process of vertically aligned carbon nanotube forest using response surface methodology. Cogent Engineering, 4 (1). pp. 1-13. ISSN 2331-1916

Habib, Mohammad Ahsan and Saleh, Tanveer and Rahman, Mustafizur (2017) Development of localised electrochemical deposition control system for fabricating micro EDM electrode. International Journal of Machining and Machinability of Materials, 19 (3). pp. 260-276. ISSN 1748-5711 E-ISSN 1748-572X

Ibrahim, Dauda Sh. and Abdul Muthalif, Asan Gani and Diyana, N. H. and Saleh, Tanveer (2017) Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth. Microsystem Technologies, 23 (7). pp. 2663-2674. ISSN 0946-7076 E-ISSN 1432-1858

Sarwar, Mirza Saquib us and Xiao, Zhiming and Saleh, Tanveer and Nojeh, Alireza and Takahata, Kenichi (2016) Micro glow plasma for localized nanostructural modification of carbon nanotube forest. Applied Physics Letters, 109. 081604-1. ISSN 0003-6951 E-ISSN 1077-3118

Rana, Masud and Mohd Asyraf, M. R. and Saleh, Tanveer and Asan Gani, Abdul Muthalif (2016) Investigation of anisotropic reflectance from densified arrays of vertically aligned carbon nanotube forests (VACNTs). Chemical Physics Letters , 658. pp. 343-346. ISSN 0009-2614

Rana, Masud and M Razib, M Asyraf and Saleh, Tanveer and Asan Gani, Abdul Muthalif (2016) Enhancement of reflectance of densified vertically aligned carbon nanotube forests. Carbon Letters, 18. pp. 67-70. ISSN 1976-4251 E-ISSN 2233-4998

Al-Ahmari, A. and Rasheed, M. Sarvar and Khan Mohammed, Muneer and Saleh, Tanveer (2016) A hybrid machining process combining micro-EDM and laser beam machining of nickel-titanium based shape memory alloy. Materials and Manufacturing Processes, 31 (4). pp. 447-455. ISSN 1042-6914 E-ISSN 1532-2475

M Razib, M Asyraf and Rana, Masud and Saleh, Tanveer and Asan Gani, Abdul Muthalif (2016) Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs). Fullerenes, Nanotubes and Carbon Nanostructures. pp. 88-99. ISSN 1536-383X E-ISSN 1536-4046

Rana, M. M. and Mohd Razib, Mohd Ashraf and Saleh, Tanveer and Abdul Muthalif, Asan Gani (2015) Development of an angle sensor using optical polarizer. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17416-17420. ISSN 1819-6608

Ibrahim , Dauda Sh. and Abdul Muthalif, Asan Gani and Saleh, Tanveer (2015) A piezoelectric based energy harvester with magnetic interactions: modelling and simulation. Advanced Materials Research, 1115. pp. 549-554. ISSN 1022-6680

Ba Hamid, Alala M. and Makhdoomi, Mohatashem R. and Saleh, Tanveer and Bhuiyan, Moinul (2015) Development of a Shape Memory Alloy (SMA) based assistive hand. Advanced Materials Research, 1115. pp. 454-457. ISSN 1022-6680

Saleh, Tanveer and Rasheed, Aous Naji and Abdul Muthalif, Asan Gani (2015) Experimental study on improving μ- WEDM and μ-EDM of doped silicon by temporary metallic coating. International Journal of Advanced Manufacturing Technology, 78. pp. 1651-1663. ISSN 1433-3015 (O); 0268-3768 (P)

Latief, Marsad and Ali, Md. Azhar and Mannan, Abdul and Saleh, Tanveer and Bhuiyan, Moinul and Khan, Md. Raisuddin (2015) Remote interior temperature control of parked vehicles. Advanced Materials Research, 1115. pp. 494-498. ISSN 1022-6680

Anwar, Mohammed Muntakim and Saleh, Tanveer and Madden, John D. W. and Takahata, Kenichi (2014) Micropatterning polypyrrole conducting polymer by pulsed electrical discharge. Macromolecular Materials and Engineering, 299 (2). pp. 198-207. ISSN 1439-2054

Rasheed, Aous Naji and Abdul Muthalif, Asan Gani and Saleh, Tanveer (2014) Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating. Journal of Manufacturing Technology Research, 5 (1-2). pp. 1-17. ISSN 1943-8095

Dahmardeh, Masoud and Mohamed Ali, Mohamed Sultan and Saleh, Tanveer and Min Hian, Tee and Moghaddam, Mehran Vahdani and Nojeh, Alireza and Takahata, Kenichi (2013) High-power MEMS switch enabled by carbon-nanotube contact and shape-memory-alloy actuator. Physica Status Solidi (A) Applications and Materials, 210 (4). pp. 631-638. ISSN 1862-6300

Saleh, Tanveer and Dahmardeh, Masoud and Nojeh, Alireza and Takahata, Kenichi (2013) Dry micro-electro-discharge machining of carbon-nanotube forests using sulphur-hexafluoride. Carbon, 52. pp. 288-295. ISSN 0008-6223

Saleh, Tanveer and Moghaddam, Mehran Vahdani and Mohamed Ali, Muhamed Sultan and Dahmardeh, Masoud and Foell, Charles Alden and Nojeh, Alireza and Takahata, Kenichi (2012) Transforming carbon nanotube forest from darkest absorber to reflective mirror. Applied Physics Letter, 101 (6). 061913-1. ISSN 1077-3118 (O), 0003-6951 (P)

Saleh, Tanveer and Rahman, Mustafizur (2011) In-process truing for ELID (Electrolytic In-Process Dressing) grinding by pulsewidth control. IEEE Transactions on Automation Science and Engineering, 8 (2). pp. 338-346. ISSN 1545-5955

Saleh, Tanveer and Dahmardeh, Masoud (2011) Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests. Journal of Applied Physics, 110 (10). ISSN 0021-8979

Jahan, M. P. and Saleh, Tanveer and Rahman, M. and Wong, Y.S. (2010) Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide. Journal of Manufacturing Science and Engineering, 135 (2). 054503-1. ISSN 1087-1357

Saleh, Tanveer and Bishwas, Indraneel and Rahman, Mustafizur (2010) Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back. International Journal of Advanced Manufacturing Technology, 46 (1-4). pp. 123-130. ISSN 1433-3015 (O); 0268-3768 (P)

Habib, Md Ahsan and Saleh, Tanveer and Rahman, Mustafizur Azizur (2010) Modelling for fabrication of microelectrodes by localized electrochemical deposition for micro-electrodischarge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (11). pp. 1741-1755. ISSN 0954-4054

Rahman, M. and Asad, A.B.M.A and Masaki, T. and Saleh, Tanveer and Wong, Y.S. and Senthil Kumar, A. (2010) A multiprocess machine tool for compound micromachining. International Journal of Machine Tools and Manufacture, 50 (4). pp. 344-356. ISSN 0890-6955

Sazedur Rahman, M. and Saleh, Tanveer and Lim, H.S. and Son, S.M. and Rahman, M. (2008) Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation. International Journal of Machine Tools and Manufacture, 48 (7-8). pp. 887-895. ISSN 0890-6955

Saleh, Tanveer and Rahman, M. Sazedur and Lim, H.S. and Rahman, M. (2007) Development and performance evaluation of an ultra precision ELID grinding machine. Journal of Materials Processing Technology, 192/93. pp. 287-291. ISSN 0924-0136

Book

Saleh, Tanveer and Ali, Mohamed Sultan Mohamed and Takahata, Kenichi, eds. (2021) Micro Electro-Fabrication. Elsevier, Netherlands. ISBN 9780128200490

Book Chapter

Noor, Wazed Ibne and Saleh, Tanveer (2021) Electrochemical machining for microfabrication. In: Micro Electro-Fabrication. Elsevier, pp. 339-386. ISBN 9780128200490

Saleh, Tanveer and Bahar, Rubina (2020) ELID grinding for final finishing operation. In: Advances in abrasive based machining and finishing processes. Materials Forming, Machining and Tribology . Springer Nature, Switzerland, pp. 129-145. ISBN 978-3-030-43311-6

Saleh, Tanveer and Bahar, Rubina (2019) Near net shape machining by Micro-EDM and Micro-WEDM. In: Micro-electrical Discharge Machining Processes Technologies and Applications. Springer, Singapore, pp. 231-264. ISBN 978-981-13-3073-5

Saleh, Tanveer and Bahar, Rubina (2017) ELID grinding and EDM for finish machining. In: Comprehensive materials finishing. Reference module in materials science and materials engineering, 1 . Elsevier Inc., pp. 364-407. ISBN 978-0-12-803249-7

Saleh, Tanveer (2015) Electro-discharge machining for non-metal based fabrication process. In: Electrical Discharge machining (EDM), Types, Technologies and Applications. Nova Publishers , New York, pp. 383-424. ISBN 9781634835985

Saleh, Tanveer and Rahman, Mustafizur (2014) Electrolytic In-Process Dressing (ELID) grinding for nano-surface generation. In: Comprehensive materials processing. Elsevier, United Kingdom, pp. 483-522. ISBN 9780080965321

Proceeding Paper

Saleh, Tanveer and Abdulrahman, Dakhel and Banawair, Mohammed and Irfan Fikhri bin, Iszahar (2023) Implementation of IR 4.0 and IIoT in various research and TnL activities at IIUM. In: International Conference ICIRIE-2023, Kolkata, India. (Unpublished)

Ghnem, Abdulrahman and Saleh, Tanveer (2022) Three DoF articulated robotic manipulator for teaching and learning. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9-10 August, IIUM Gombak, Kuala Lumpur.

Iszahar, Irfan Fikhri and Saleh, Tanveer (2022) Gesture based control for Mitsubishi Industrial Robots. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9-10 August 2022, IIUM, Gombak, Kuala Lumpur.

Saleh, Tanveer (2021) Micro electrical discharge machining. In: Two Weeks Faculty Development Programme on Manufacturing Technology Research and Management (MTRM), India. (Unpublished)

Wan Azhar, Wan Ahmad and Saleh, Tanveer and Razib, Mohd Asyraf (2021) Development of micro-EDM machine with process parameter control for EDM drilling. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE’21), IIUM. (In Press)

Noor, Wazed Ibne and Saleh, Tanveer and Rashid, Mir Akmam Noor and Ibrahim, Azhar Mohd (2021) Effect of process parameters on the laser microdrilling performance of stainless steel, aluminium and copper. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE’21), IIUM. (In Press)

Saleh, Tanveer (2021) Microdrilling using laser-uEDM based sequential process. In: International webinar on “Recent Advancements inMechanical Engineering, 6 - 8 March 2021, India. (Unpublished)

Saleh, Tanveer (2020) Micro-patterning of CNT Forest. In: Invited Lecture, 18 January 2020, India. (Unpublished)

Saleh, Tanveer (2020) Micropatterning of vertically aligned carbon nanotubes and its remarkable optical transformation. In: International Conference on Advancements in Mechanical Engineering, 16-18 January 2020, Aliah University, Kolkata, India. (Unpublished)

Noor, Wazed Ibne and Rashid, Mir Akmam Noor and Saleh, Tanveer (2019) Micromachining using fiber laser for various metallic workpieces. In: FEIIC - International Conference on Engineering Education and Research FICEER 2019, 2nd-5th November 2019, Makkah, Kingdom of Saudi Arabia.

Saleh, Tanveer and Khan, Md. Raisuddin (2019) Hexapod robot for autonomous machining. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Islam, Saiful and Saleh, Tanveer and Latief, Marsad and Mohd Razib, Mohd Asyraf and Abdul Muthalif, Asan Gani (2019) Prototype of single degree of freedom optical resolver. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur.

Wan Azhar, Wan Ahmad and Saleh, Tanveer (2019) Development and performance evaluation of modular RC-based power supply for micro-EDM. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19, 30th-31st October 2019, Putrajaya. (In Press)

Mollik, Md Shohag and Noor, Wazed Ibne and Saleh, Tanveer and Bazarah, Mohammed Gamal Abdulhameed (2019) Development of an active fixture for ultrasonically assisted micro electro-discharge machining. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19, 30th-31st October 2019, Putrajaya.

Tomal, A N M Amanullah and Saleh, Tanveer and Khan, Md. Raisuddin (2017) Improvement of dimensional accuracy of 3-D printed parts using an additive/subtractive based hybrid prototyping approach. In: 6th International Conference on Mechatronics - ICOM'17, 8th–9th August 2017, Kuala Lumpur.

Jarin, Sams and Saleh, Tanveer and Asan Gani, Abdul Muthalif and Ali, Mohammad Yeakub (2017) An experimental investigation on the effect of nanopowder for micro-wire electro discharge machining of gold coated silicon. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8-11 Nov 2016, Kuala Lumpur.

Amanullah, A.N.M. and Murshiduzzaman, Sheikh and Saleh, Tanveer and Khan, Md. Raisuddin (2017) Design and development of a hybrid machine combining rapid prototyping and CNC milling operation. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8-11 Nov 2016, Kuala Lumpur.

Ba Hamid, Alala M. and Makhdoomi, Mohatashem R. and Saleh, Tanveer (2017) An assistive robotic hand based on human computer interface (HCI) and shape memory alloy (SMA) actuator. In: 9th International Conference on Robotic, Vision, Signal Processing and Power Applications Empowering Research and Innovation, 2nd -3rd February 2016, Penang, Malaysia.

Jarin, Sams and Saleh, Tanveer and Bhuiyan, Moinul and Muthalif, Asan G. A. and Ali, Mohammad Yeakub (2017) An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining. In: 2017 World Congress on Micro and Nano Manufacturing, 27th-30th March 2017, Kaohsiang, Taiwan.

Saleh, Tanveer and Abdul Muthalif, Asan Gani (2016) Anisotropic carbon nanotube for new type of angle sensor development. In: International Conference on Advances in Functional Materials (AFM 2016), 8th-11th Aug. 2016, Jeju Island, South Korea. (Unpublished)

MRazib, MAsyraf and Rana, M. M. and Hassan, M. A. and Saleh, Tanveer (2015) Application of VACNTs in MEMS devices. In: World Congress on Microscopy: Instrumentation, Techniques and Applications in Life Sciences and Materials Sciences (WCM 2015) , 9-11 October 2015 , Mahatma Gandhi University, Kottayam, Kerala, India. (Unpublished)

Makhdoomi , Mohatashem R. and Ba hamid, Alala M. and Saleh, Tanveer (2015) Development and performance evaluation of a linear actuator based Wwarable assistive device. In: Asian Control Conference (ASCC 2015), 31 May - 3 June2015, Kota Kinabalu, Sabah. (Unpublished)

Makhdoomi, Mohatashem R. and Ba Hamid, Alala M. and Saleh, Tanveer (2015) Development and performance evaluation of a linear actuator based wearable assistive device. In: 2015 10th Asian Control Conference (ASCC 2015), 31st May- 3rd June 2015, Kota Kinabalu, Sabah.

Nordin, Norhidayati Diana and Abdul Muthalif, Asan Gani and Saleh, Tanveer and Zainul Azlan, Norsinnira (2015) Optimal particle ratio to maximize the dynamic range of Magnetorheological Fluid (MRF) damper for prosthetic limb. In: 2015 10th Asian Control Conference (ASCC 2015), 31st May- 3rd June 2015, Kota Kinabalu, Sabah.

Ibrahim , Dauda Sh. and Abdul Muthalif, Asan Gani and Saleh, Tanveer (2014) Piezoelectric based vibration energy harvester with tip attraction magnetic force: modeling and simulation. In: Mathematics and Computers in Science and Industry (MCSI), 13th-15th Sept. 2014, Varna, Bulgaria.

Azhar, Marsad Latif and Mannan, Abdul and Khan, Md. Raisuddin and Bhuiyan, Moinul and Saleh, Tanveer (2014) Inner ambient control of the parked vehicle in a hot sunny day by remote access. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Gombak, Kuala Lumpur.

Rasheed, Aous Naji and Abdul Muthalif, Asan Gani and Saleh, Tanveer (2014) Improving μ-wire electro-discharge machining operation of polished silicon wafer by conductive coating. In: 9th International Conference on MicroManufacturing (ICOMM 2014), 25 - 28 Mar 2014, Singapore.

Mohd Razib, M. A. and Saleh, Tanveer and Hassan, M. A. (2014) Micro-Mechanical Bending (M2 B) method for Carbon Nanotube (CNT) based sensor fabrication. In: Smart Instrumentation, Measurement and Applications (ICSIMA), 2014 IEEE International Conference on, 25 Nov - 25 Nov 2014, Berjaya Times Hotel Kuala Lumpur - Malaysia 1 Jalan Imbi 55100 Malaysia.

Saleh, Tanveer (2013) A new μ-patterning method for Carbon Nanotube (CNT) forest and its remarkable optical transformation. In: 16th International Conference on Advances in Material and Processing Technology AMPT 2013, 22-26 Sept 2013, Taipei, Taiwan. (Unpublished)

Saleh, Tanveer (2013) µ-Patterning of Carbon Nanotube patterning of Carbon Nanotube (CNT) forest for MEMS applications. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Saleh, Tanveer (2012) High-precision dry micro-electro-discharge machining of Carbon-Nanotube forests with ultralow discharge energy. In: International Conference on Micro Electro Mechanical Systems (MEMS), 29 Jan - 2 Feb 2012, Paris.

Saleh, Tanveer (2004) Design of a gyroscopically stabilized single-wheeled robot. In: Conference on Robotics, Automation and Mechatronics, 1 - 3 December 2004, Singapore.

Monograph

Saleh, Tanveer (2019) Development of a prototype of carbon nanotube-based angular sensor. Project Report. UNSPECIFIED. (Unpublished)

Saleh, Tanveer and Bhuiyan, Moinul and Abdul Muthalif, Asan Gani (2017) Investigation on the effect of "nano-powder" in micro-wire electro-discharge machining (μ-WEDM) process for fabricating micro actuators with nanometric mirror surface. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Copyright

Saleh, Tanveer and Mollik, Md Shohag and Islam, Md Saiful (2019) Modular ultrasonic vibration device for micro electrodischarge machining. [Copyright] (Unpublished)

Patent

Saleh, Tanveer and Saiful, Islam and Latief, Marsad and Mohd Razib, Mohd Asyraf (2018) Optical resolver and method of use. PI 2018000918.

Saleh, Tanveer and Mohd Razib, Mohd Asyraf and Md. Masud, Rana and Muthalif, Asan G. A. (2016) Angular sensor. PI 2016000202.

This list was generated on Fri Mar 29 19:37:04 2024 +08.