IIUM Repository (IREP)

Items where Author is "Rahman, Mohammed Ataur"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 129.

Article

Rahman, Mohammed Ataur and Abdi, Yusuf (2017) A novel electro conductive graphene/silicon-dioxide thermo-electric generator. IOP Conference Series: Materials Science and Engineering, 185. pp. 1-12. ISSN 1757-899X

Rahman, Mohammed Ataur (2017) Thermoelectric technology for IC engine waste energy harvesting:
liquid cooling approach. International Journal of Scientific and Engineering Research, 7 (11). pp. 1-12. ISSN 2229-5518 (In Press)

Rafia, Afroz and Rahman, Mohammed Ataur (2017) Health impact of river water pollution in Malaysia. International Journal of Advanced and Applied Science, 4 (5). pp. 78-85. ISSN 2313-626X

Rahman, Mohammed Ataur and Aung, Kyaw Myu and Saifullah, Khalid and Rahman, Mizanur (2017) Physics of ZnO/SiO2 electrolyte semi-conductive thermal electric generator. International Journal of Advanced and Applied Sciences, 4 (5). pp. 35-40. ISSN 2313-626X

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Ihsan, Sany Izan (2017) Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981

Mohiuddin, A. K. M. and Amer, Muhammad Yazid and Rahman, Mohammed Ataur and Khan, Ahsan Ali (2017) Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981

Rahman, Mohammed Ataur and Rahman, Mizanur and Karim, Hafizzul (2017) The theory of the development of an electromagnetic engine for automotive use. International Journal of Advanced Robotics and Automation, 2 (1). pp. 1-8. ISSN 2473-3032 (In Press)

Rahman, Mohammed Ataur and Kyaw, Myo Aung and Rafia, Afroz (2017) Parametric study of palladium/graphene catalyst on-board steam reformer for hydrogen generation from IC engine’s waste. International Journal of Engineering & Technology IJET-IJENS, 17 (1). pp. 13-24. ISSN 2077-1185

Rafia, Afroz and Rahman, Mohammed Ataur and Masud, Muhammad Mehedi Ehedi and Akhtar, Rulia (2017) The knowledge, awareness, attitude and motivational analysis of plastic waste and household perspective in Malaysia. Environmental Science and Pollution Research, 24 (3). pp. 2304-2315. ISSN 0944-1344

Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Amin and Khalid, Helmi (2017) Two-phase evaporative battery thermal management technology for EVs/HEVs: theory and control. International Journal of Automotive Technology, 18 (5). pp. 875-882. ISSN 1229-9138

Rahman, Mizanur and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur and Khan, Sheroz (2016) Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 362-367. ISSN 1819-6608

Rahman, Mohammed Ataur and Rafia, Afroz (2016) Lithium battery recycling management and policy. International Journal of Energy Technology and Policy, 13 (3). pp. 278-291. ISSN 1741-508X

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal, 16 (2). pp. 57-68. ISSN 2289-7860 (O), 1511-788X (P)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2015) Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal, 16 (2). pp. 69-78. ISSN 2289-7860 (O), 1511-788X (P)

Rahman, Mohammed Ataur and Razzak, Fadhilah and Rafia, Afroz and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews, 51. pp. 382-395. ISSN 1364-0321

Rashid, Muhammad Mahbubur and Firdaus, Md Meftahul and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2015) ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. Journal of Mechanical Science and Technology, 29 (7). pp. 2793-2802. ISSN 1738-494X

Rahman, Mohammed Ataur and Raja, Ramiz and Rafia, Afroz and Hossain, Altab (2015) Electricity generation from EV body build with Al2O3 filler ER sandwiched by carbon fiber and lithium thin plate. Energy Education Science and Technology Part A: Energy Science and Research , 33 (3). ISSN 1301-8361 (In Press)

Rafia, Afroz and Rahman, Mohammed Ataur and Masud, Muhammad Mehedi and Akhtar, Rulia and Duasa, Jarita (2015) How individual values and attitude influence consumers’ purchase intention of electric vehicles—some insights from Kuala Lumpur, Malaysia. Environment and Urbanization ASIA, 6 (2). pp. 1-18. ISSN 0976-3546 (O), 0975-4253 (P)

Rahman, Mohammed Ataur and Rafia, Afroz and Alam, A. H. M. Zahirul (2014) Development of electric vehicle: public perceptionand attitude, the Malaysian approach. World Review on International Transportation Research, 5 (2). pp. 149-167. ISSN 1749-4729

Rahman, Mohammed Ataur and Nur, Farhana and Hawlader, Mohammad Nurul Alam and Rafia, Afroz (2014) Fuzzy controlled evaporative battery thermal management system for EV/HEV. International Journal of Electric and Hybrid Vehicles (IJEHV), 7. pp. 1-21. ISSN 1751-4088

Hossain, Altab and Nazir, M. and Ramesh, Singh and Rahman, Mohammed Ataur and K., H. Wong (2014) Fuzzy logic based model for prediction of building wall humidity level. Indoor and Built Environment, 23 (4). pp. 565-573. ISSN 1423-0070 (In Press)

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur (2014) Design and fabrication of a simple cost effective spin coater for deposition of thin film. Advances in Environmental Biology, 8 (3). pp. 729-733. ISSN 1995-0756

Afroz, Rafia and Rahman, Mohammed Ataur and A.H.M., Zahirul Alam (2014) Development of electric vehicle: public perception and attitude, the Malaysian approach. World Review of Business Research, 5 (2). pp. 149-167. ISSN 1838-3955

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Rashid, Muhammad Mahbubur and Hossain, Altab (2014) Energy efficient electromagnetic actuated CVT system. Journal of Mechanical Science and Technology, 28 (4). pp. 1153-1160. ISSN 1738-494X

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2014) Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology, 28 (9). pp. 3667-3677. ISSN 1976-3824 (O), 1738-494X (P)

Rahman, Mohammed Ataur and Yahya, Azmi (2013) Performance investigation of an advanced tracked prime mover on the low bearing soil. Journal of Terramechanics, 50 (4). pp. 230-244. ISSN 0022-4898

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2013) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 217-225. ISSN 1755-9766

Rahman, Mohammed Ataur and Abdul Razak, Fadhilah and Hawlader, Mohammad Nurul Alam and Rashid, Muhammad Mahbubur (2013) Nonlinear modeling and simulation of waste energy harvesting system for hybrid engine: fuzzy logic approach. Journal of Renewable and Sustainable Energy Editorial Office, 5. pp. 1-13. ISSN 1941-7012

Hossain, Altab and Rahman, Mohammed Ataur (2013) Evaluation of wind turbine power generation by using an adaptive neuro fuzzy inference system. Journal of Renewable and Sustainable Energy Editorial Office, xx (xx). xx-xx. ISSN 1941-7012 (In Press)

Rahman, Mohammed Ataur and Hossain, Altab and Rashid, Muhammad Mahbubur (2013) Fuzzy control enerygy efficient hybrid engine for small scale vehicle. Research Journal of Applied Science, Engineering and Technology. ISSN 2040-7467 (In Press)

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Alam, A. H. M. Zahirul (2012) Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology, 26 (7). pp. 1-9. ISSN 1976-3824 (O), 1738-494X (P)

Rahman, Mohammed Ataur and Hossain, Altab and Alam, A. H. M. Zahirul and Rashid, Muhammad Mahbubur (2012) Fuzzy knowledge-based model for prediction of traction force of an electric golf car. Journal of Terramechanics, 49 (1). pp. 13-25. ISSN 0022-4898

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2012) Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research, 445. pp. 899-904. ISSN 1662-8985

Hossain, Altab and Rahman, Mohammed Ataur and Iqbal, A.K.M. Parvez and Ariffin, Muhidin and M., Mazian (2012) Drag analysis of an aircraft wing model and without bird feather like winglet. International Journal of Aerospace and Mechanical Engineering, 6 (1). pp. 8-13. ISSN 2010-3794 (O), 2010-3786 (P)

Abdul Razak, Fadhilah and Rahman, Mohammed Ataur (2012) Dynamic modeling and simulation of waste energy harvesting system for urban car. Advanced Material Research, 576. pp. 679-682. ISSN 1662-8985

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ramesh, Singh (2012) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), 19 (4). pp. 407-426. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Sazzad, Sharif and Sadakatul, SMS Bari (2011) Fuzzy logic control electromagnetic actuated CVT system. Journal of the Chinese Institution of Engineers, 35. ISSN 0253-3839 (P), 2158-7299 (O) (In Press)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Arfah, A, and Farraen, M.A. (2011) Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 202-218. ISSN 1745-6444 (O), 1745-6436 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology, 12 (5). pp. 745-753. ISSN 1229-9138 (Print), 1976-3832 (Online)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Haw Shin, Yap (2011) Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research, 265. pp. 1719-1724. ISSN 1022-6680

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225. pp. 721-734. ISSN 0954-4070

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Performance measurement of a tracked vehicle system. International Journal of Automotive Technology, 12 (4). pp. 503-512. ISSN 1229-9138

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology, 75. pp. 50-57. ISSN 2010-376X

Hossain, Altab and Rahman, Mohammed Ataur and Hossen, Jakir and Iqbal, A.K.M. Asif (2011) Application of fuzzy logic approach for an aircraft model with and without winglet. International Journal of Aerospace and Mechanical Engineering, 5 (4). pp. 224-232. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology, 25 (4). pp. 1035-1041. ISSN 1976-3824 (O), 1738-494X (P)

Rahman, Mohammed Ataur and Hossain, Altab (2011) Design parameters study of an intelligent air-cushion tracked vehicle. Transactions of the Canadian Society of Mechanical Engineering. ISSN 0315-8977 (In Press)

Rahman, Mohammed Ataur (2011) Development of a model of of energy efficient hybrid engine towards green technology. International Journal of Electric and Hybrid Vehicles, 3 (2). pp. 138-151. ISSN 1751-4096 (O), 1751-4088 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. Journal of Terramechanics. ISSN 0022-4898

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Ismail, Ahmad Faris and Yahya, Azmi (2011) Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS), 18 (3). pp. 227-244. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Hossain, Altab (2011) Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), xx (xx). ISSN 1741-5152 (O), 1744-232X (P) (In Press)

Hossain, Altab and Rahman, Mohammed Ataur and Hossen, Jakir and Iqbal, Parvez and M.I., Zahirul (2011) Prediction of aerodynamic characteristics of an aircraft model with and without winglet using fuzzy logic technique. Aerospace Science and Technology, 15 (8). pp. 595-605. ISSN 1270-9638

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2011) A study on automated traction control system of an electrical golf car. International Journal of Electric and Hybrid Vehicles (IJEHV), 3 (1). pp. 47-61. ISSN 1751-4096 (O), 1751-4088 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Power consumption prediction for an intelligent air-cushion tracked vehicle: fuzzy expert system. Journal of Energy and Power Engineering, 4 (5). pp. 10-17. ISSN 1934-8975

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Yahya, Azmi and Hossain, Altab (2010) Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47 (1). pp. 45-54. ISSN 0022-4898

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. International Journal of Aerospace and Mechanical Engineering, 4 (1). pp. 288-295. ISSN 2010-3794 (O), 2010-3786 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2010) Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption. International Journal of Vehicle Systems Modelling and Testing, 5 (2/3). pp. 237-253. ISSN 1745-6444 (O), 1745-6436 (P)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2010) Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach. World Academy of Science, Engineering and Technology, 62. pp. 163-169. ISSN 1307-6884

Hossain, Altab and Rahman, Mohammed Ataur and Rahman, Md. Mozasser and Hasan, SK. and Hossen, Md. Jakir (2009) Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. Journal of Urban and Emvironmental Engineering, 3 (2). pp. 43-51. ISSN 1982-3932

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Yahya, Azmi (2009) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal (3). pp. 63-71. ISSN 1874-155X

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2009) Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 16 (1/2). pp. 225-242. ISSN 1741-5152 (O), 1744-232X (P)

Azad, Md. Saiful and Anwar, Farhat and Rahman, Mohammed Ataur (2009) Performance of ad hoc routing protocols in mobile WiMAX environment. Lecture Notes in Electrical Engineering, 33. pp. 53-65. ISSN 1876-6100

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2009) Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal, 3. pp. 15-28. ISSN 1874-4478

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME), 3 (2). pp. 176-186. ISSN 1823-0334

Mohiuddin, A. K. M. and Saidur, R. and Sattar, M.A. and Rahman, Mohammed Ataur (2007) Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3). pp. 155-162. ISSN 1513-718X

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2007) Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 189-199. ISSN 1823-0334

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2007) Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221. pp. 789-800. ISSN 0954-4070

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Mohd Subri, Mohd Dzaidin (2007) Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 40-47. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 118-124. ISSN 1823-0334

Rahman, Mohammed Ataur and Yahya, Azmi and Zohadie, Mohd. and Ahmad, Desa and Wan Ismail, Wan Ishak (2006) Tractive performance of a designed and developed segmented rubber tracked vehicle on Sepang peat terrain during straight motion: theoretical analysis and experimental substantiation. International Journal of Heavy Vehicle Systems (IJHVS), 13 (4). pp. 298-323. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Zohadie, Mohd. and Wan Ismail, Wan Ishak (2006) Traction mechanics of the designed and developed segmented rubber track vehicle for Sepang peat terrain in Malaysia during turning motion: theoretical and experimental analysis. International Journal of Heavy Vehicle Systems (IJHVS), 13 (4). pp. 324-350. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Ahmad, Desa and Wan Ismail, Wan Ishak (2005) Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 12 (3). pp. 239-267. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Wan Ismail, Wan Ishak (2005) Designing framework of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. IIUM Engineering Journal, 6 (1). pp. 1-22. ISSN 1511-788X

Rahman, Mohammed Ataur and Yahya, Azmi and Bardaie, Mohd. Zohadie and Wan Ismail, Wan Ishak (2005) Processes involved in the design of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Vehicle Design (IJVD), 38 (4). pp. 347-378. ISSN 1741-5314 (O), 0143-3369 (P)

Rahman, Mohammed Ataur and Azmi , Yahya (2005) Simulated steerability of a segmented rubber tracked vehicle during turning on sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 12 (2). pp. 139-168. ISSN 1741-5152 (O), 1744-232X (P)

Rahman, Mohammed Ataur (2004) Mechanical properties in relation to vehicle mobility of Sepang peat terrain in Malaysia. Journal of Terramechanics, 41 (1). pp. 25-40. ISSN 0022-4898

Book Chapter

Hossain, Altab and Rahman, Mohammed Ataur (2014) Sensor-controlled intelligent vehicle systems: demand and needs for a global automotive landscape. In: Comprehensive material processing. Elsevier, Ltd, UK, pp. 473-497. ISBN 9780080965321

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and -, Irwan and -, Azoa and -, Adly (2011) Design and development of an automatic car door opening and locking system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 48-52. ISBN 9789670225685

Ali , M.H and Abdul Hamid, Syamsul Bahrin and Rahman, Mohammed Ataur (2011) Development of unmanned vehicle utilizing GPS system. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 53-58. ISBN 9789670225685

Rahman, Mohammed Ataur (2011) Performance investigation of energy efficient hybrid engine towards green technology. In: Engine and Auxiliary Systems. IIUM Press, Kuala Lumpur, pp. 131-137. ISBN 978-967-418-216-8

Conference or Workshop Item

Mizanur, Rahman and Rashid, Muhammad Mahbubur and Rahman, Mohammed Ataur and Alam, A H M Zahirul and Ihsan, Sany Izan and Mollik, M S (2017) Analysis of the internal temperature of the cells in a battery pack during SOC balancing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan (2017) Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Jaafar, Abdul Hassan and Rahman, Mohammed Ataur and Mohiuddin, A K M and Rashid, Muhammad Mahbubur (2017) Modelling of an advanced charging system for electric vehicles. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur.

Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Mokhtar, Hannan (2015) The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015), 6th-9th Dec. 2015, Singapore.

Rahman, Mohammed Ataur and ., NurFarahana and Hawlader, Mohammad Nurul Alam (2014) Fuzzy controlled evaporative battery thermal management system for EV/HEV. In: ASME 2014 8th International Conference on Energy Sustainability co-located with ASME 2014 12th Fuel Cell Science, Engineering & Technology Conference, 30th June-2nd July 2014, Boston, MA, USA.

Rahman, Mohammed Ataur and Ahmed, Helmi and Hawlader, Mohammad Nurul Alam (2014) Noble evaporative battery thermal management system for EV/HEV. In: 4th International Conference on Industrial Engineering and Operations Management (IEOM) 2014, 7-9 Jan 2014, Bali, Indonesia.

Rashid, Muhammad Mahbubur and Molik, Md. Sazib and Rahman, Mohammed Ataur (2014) Design and development of a flying robot with improved time constant in rescue accident victims. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14), 23-25 Sept. 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Rashid, Muhammad Mahbubur and Molik, Md. Sazib and Rahman, Mohammed Ataur and Jahiman, Mohd Azmin (2014) The design and development of small electric vehicles (EV) using power inverter based AC motor. In: 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14), 23rd-25th Sept. 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Rahman, Mohammed Ataur and Ahmed, Helmi and Rafia, Afroz and Alam, A. H. M. Zahirul and Rashid, Muhammad Mahbubur (2013) Development of green transportation system. In: IIUM Enginnering Congress 2013(2-4July 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Khalid, A. Hilmi and Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Alam (2013) Evaporative cooling system for electric vehicles battery pack. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16), 2nd-4th July 2013, Kuala Lumpur. (Unpublished)

Rahman, Mohammed Ataur and Sazzad, Sharif (2013) Fuzzy Logic Controlled Electromagnetic Actuated CVT system for passenger car. In: FISITA 2012, 27-30 November 2012, Beijing, China.

Rafia, Afroz and Rahman, Mohammed Ataur (2013) Malaysian perception and attitude towards electric vehicle. In: IIUM Enginnering Congress 2013, 2-4 July 2013, Kuala Lumpur, Malaysia.

Rashid, Muhammad Mahbubur and Musa, A. and Rahman, Mohammed Ataur and Farahana, Ainul F. (2011) Design and development of automatic parking system and electronic parking fee collection based on number plate recognition. In: 4th International Conference on Advanced Computer Theory and Engineering (ICACTE 2011), 28-30 December 2011, Dubai, UAE. (Unpublished)

Farhana, Soheli and Alam, A. H. M. Zahirul and Khan, Sheroz and Rahman, Mohammed Ataur (2011) Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 28-30 September, Kota Kinabalu, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011, 19 - 21, October 2011, Sheraton Krabi Beach Resort, Krabi, Thailand. (Unpublished)

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2011) Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2011) Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian (2011) Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2011) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2011) Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition, April 2011, Detroit, MI, USA.

Muhammad , Mahbubur Rashid and Alang Md Rashid, Nahrul Khair and Faruq, Alias and Rahman, Mohammed Ataur (2011) Design and implementation of fuzzy based controller for modern elevator group. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA), 25-28 Sept. 2011, Langkawi.

Farhana, Soheli and Alam, A. H. M. Zahirul and Khan, Sheroz and Rahman, Mohammed Ataur (2011) Design of a 2-bit multi valued analog-to-digital converter. In: 4th International Conference on Mechatronics (ICOM) , 17-19 May 2011 , Kuala Lumpur.

Rahman, Mohammed Ataur and Hossain, Altab (2011) Fuzzy logic traction control system for a golf cart. In: 17th International Conference of the International Society for Terrain-Vehicle Systems, 18- 22 Sept 2011, Blacksburg, Virginia, USA.

Rahman, Mohammed Ataur and Sharif, Sazzad and A.H.M., Zahirul Alam and M.M., Rashid (2011) Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management, 06-09 Dec 2011, Singapore. (Unpublished)

Mohiuddin, A. K. M. and Hossain, Altab and Rahman, Mohammed Ataur and Aminanda, Yulfian (2010) Tractive efficiency analysis for an intelligent air-cushion tracked vehicle. In: ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010 , 12-18 November, 2010, Vancouver, British Columbia, Canada.

Rahman, Mohammed Ataur (2010) Design and development of UrbanConcept car. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Rahman, Mohammed Ataur and Asrar, Waqar and Ihsan, Sany Izan and Hossain, Altab and Abdullah, Kassim (2010) Development of a fuel efficient hybrid engine towards green technology. In: International Conference on Sustainable Mobility 2010, 1-3 December 2010, Seri Pacific Hotel Kuala Lumpur.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Aminanda, Yulfian and Muhidin, Arifin (2010) Development of an intelligent air-cushion system for a swamp tracked vehicle. In: 33rd FISITA World Automotive Congress 2010, 30 May - 4 June 2010, Budapest, Hungary.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Shaari, Norazean and Arif, Mohd and Iqbal, A.K.M.P. and Hassan, Khairul (2010) Finite element method for the study of air-cushion tracked vehicle-terrain interaction. In: International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010), 23-24 Dec 2010, Khulna, Bangladesh.

Rahman, Mohammed Ataur and Alam, A. H. M. Zahirul and A. K., M. Mohiuddin (2010) Modelling of an Electromagnetic intake & exhaust control hybrid engine. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, Parvez and Muhidin, Arifin and Mohamad, Mazian (2009) Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladesh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2009) Intelligent air-cushion system of swamp peat vehicle control: fuzzy logic technique. In: International Conference on Mechanical Engineering 2009 (ICME2009), 26-28 December, 2009, Dhaka, Bangladeh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur (2009) Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009, 4-5 May, 2009, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. (2009) Electromagnetic actuated CVT system for vehicle. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2009 (IEEM 2009), 8-11 December 2009, Hong Kong.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Irwan, I. and Azoa, A. and Adly, A. (2008) Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Hossain, Altab and Mohiuddin, A. K. M. (2008) Integrated mechanics for design of the hybrid electrical aircushion track vehicle for swamp peat. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29th December 2008, Dhaka, Bangladesh.

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, A.K.M. P. (2008) Modeling of the developed flexible skirt air-cushion track vehicle model. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Probable solution of torque dip problem of CAMPRO 1.6L engine. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and M. A, Farraen (2008) Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May 2008, Cairo, Egypt.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2008) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008, July 2008, Germany.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Noraini, N. and Irwan, I. (2007) Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Nursyifa, S. and Nora, A. and Hidayah, N. and Eshah, J. (2007) A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29 - 31 December, 2007, Dhaka, Bangladesh.

Book

Rahman, Mohammed Ataur and Rafia, Afroz and Yahya, Azmi (2012) The peat swamp:Productivity, traficability and mechanization. Environmental Science, Engineering and Technology . Nova Science Publishers Inc., New York, USA. ISBN 978-1-61942-670-2 (In Press)

Rahman, Mohammed Ataur and Afroz, Rafia (2011) Advanced theory of peat vehicle mobility. VDM Verleg, Germany. ISBN 9783639304329

Patent

Rahman, Mohammed Ataur and Hawlader, Mohammad Nurul Alam (2015) A thermal management system for electric vehicle batteries. IP 2015700050 (PTA7.98-2).

Rahman, Mohammed Ataur (2011) Electromagnetic actuated CVT system for vehicle. PI20091435.

This list was generated on Sat Sep 23 13:39:10 2017 +08.